HP Scanjet 5300C and SUSE 10.1
- From: Alberto Garcia Baladia <aidalab9591@xxxxxxxxxxxxxx>
- Date: Sat, 27 May 2006 20:57:45 +0200
Hello. This scanner (Hewlett-Packard Scanjet 5300c) is fully supported by
SANE and was working perfectly with SuSE 10.0. Now, with 10.1, it does not
work at all. sane-find-scanner and lsusb detect it, but not Avision driver
from SANE. The output of dmesg indicates an error in configuration at he
kernel level. I am very upset with this problem: After years of
workarounds starting with SUSE 8.2, YaST was able to install the scanner
smoothly in 9.3 and 10.0. Now I am at the beginning again. I posted this in
Novell and other SUSE forums, but nobody replied:
lsusb
Bus 005 Device 004: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 002: ID 03f0:0701 Hewlett-Packard ScanJet 5300c/5370c
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 03f0:6004 Hewlett-Packard DeskJet 5550
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
-----------------------------------------------------------------------------------------
sane-find-scanner
found USB scanner (vendor=0x03f0, product=0x0701) at libusb:003:002
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
------------------------------------------------------------------------------------------
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------------------------------------------------------------------------------------------
dmesg
usb 3-1: new device found, idVendor=03f0, idProduct=0701
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Hewlett Packard ScanJet 5300C/5370C
usb 3-1: Manufacturer: Hewlett Packard
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: can't set config #1, error -71
Thank you in advance.
--
Alberto Garcia Baladia SUSE 10.1 i386 KDE 3.5.2 Kernel
2.6.16.13-4-smp
.
- Follow-Ups:
- Re: HP Scanjet 5300C and SUSE 10.1
- From: Roscoe
- Re: HP Scanjet 5300C and SUSE 10.1
- Prev by Date: Re: Veo Stingray not loading driver?
- Next by Date: Re: MSI RS482M4-ILD (Radeon Xpress 200 chipset)
- Previous by thread: Linux on Sony Vaio
- Next by thread: Re: HP Scanjet 5300C and SUSE 10.1
- Index(es):
Relevant Pages
|
