Re: disable flow control on NIC card - linux

googleatpilotsuppliescom wrote:

HI,

redhat FC4, boradcom NIC


eth0: negotiated 100baseTx-FD flow-control, link ok


how do you disable flow control?


Thanx!

Ethernet and TCP/IP protocols require flow control to work at all. They are
also not accessible to the user. Ethernet is NOT an old serial line.

--
JosephKK
Gegen dummheit kampfen die Gotter Selbst, vergebens.  
--Schiller
.

Relevant Pages

  • e1000 full-duplex TCP performance well below wire speed
    ... We've connected a pair of modern high-performance boxes with integrated copper Gb/s Intel NICS, with an ethernet crossover cable, and have run some netperf full duplex TCP tests. ... The transfer rates are well below wire speed. ... The test was done with various mtu sizes ranging from 1500 to 9000, with ethernet flow control switched on and off, and using reno and cubic as a TCP congestion control. ...
    (Linux-Kernel)
  • Re: Netzwerkproblem GBit -> 100MBit
    ... Ethernet selber hat kein Flow control. ... Ich wuerde wenn nicht schon geschehen, den Uplink fix einstellen und alles ... auf Full Duplex oder alles auf Half Duplex testen. ...
    (de.comp.sys.novell)
  • Re: disable flow control on NIC card - linux
    ... i just need to have flow control turned off to avoid issues of throttle ... joseph2k wrote: ... redhat FC4, boradcom NIC ... Ethernet and TCP/IP protocols require flow control to work at all. ...
    (comp.os.linux.hardware)