Intel BOXDG965WHMKR Linux compatibility?

Anyone using this motherboard? Are there any compatibility problems aside
from the Jmicron controller? (I have an SATA DVD ROM so I won't need to use
PATA).

Any other motherboard suggestions would be appreciated. I'm going to get a
Core2 E6700 with 4G of DDR2. The box will run without X so graphics
performance is unimportant, it only has to work well enough to do an
install. I'll have FC6 64 on this system.
.

Relevant Pages

  • Re: Intel BOXDG965WHMKR Linux compatibility?
    ... from the Jmicron controller? ... (I have an SATA DVD ROM so I won't need to use ... PATA). ... Any other motherboard suggestions would be appreciated. ...
    (comp.os.linux.hardware)
  • Re: FC9 installation sees SATA drives but not PATA
    ... ASUS N1L64-SLI WS motherboard with the 0505 bios release ... I tried Fedora Live 8 with the same result, the kernel sees the SATA drives ... It’s possible that your PATA drive is plugged into an IDE adapter ... separate PCI or PCI Express PATA adapter. ...
    (Fedora)
  • Re: Good Bye Asus
    ... I have Vista 32bit. ... It has that all wonderful Jmicron controller (1.06.59 ... motherboard and chip that will properly support esata........ ... Now you have another thread running about a non-functioning eSata ...
    (microsoft.public.windows.vista.hardware_devices)
  • Re: i875/ICH5 IDE and SATA
    ... had the same problem pretty much, same motherboard, tried a few things, ... > The hard disk is SATA and connected to the first channel of the ICH5 sata ... > secondary PATA busses. ... > However if i do not compile support for PATA the system boots completely ...
    (Debian-User)
  • Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up
    ... the motherboard also has a JMicron controller on it. ... In my researching of the v1/2 issue on my drive it appears that all ...
    (freebsd-current)