Re: Seeking recommendation for external storage

On Sat, 25 Nov 2006 21:54:15 -0600, Chris Cox wrote:

Yes... these are good solutions. Should be able to run a cable long
enough. This is probably the economical choice with the most flexibility.
You could run JBOD and do RAID in software if desired.

Any recommendations for SATA boards with external connectors (that work
well with Linux) and SATA arrays? I suppose that I could use individual
drives as long as the SATA board(s) have enough connectors (or if SATA
supports serial connections like SCSI).

Thanks...

Andrew

.

Relevant Pages

  • Re: PATA HDD and only 2 IDE connectors
    ... It has 2 IDE connectors and 4 SATA connectors. ... the drives, I wouldn't even thing of going there. ...
    (comp.sys.ibm.pc.hardware.chips)
  • Re: Sata cabling
    ... Serial data transfer right. ... Take 4 SATA cables in parallel to a Hard Drive ... that has four SATA connectors. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Adding Second Sata Disk P5K-E
    ... Should this disk be connected to one of the black sata connectors ... Chapter 14 is for the four port SATA controller. ... supports legacy and native mode (I/O space and IRQ14/15 versus ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Need help on new system build
    ... There are several standards for 2x4 connectors, so you have to be a little ... The same goes with LEDs. ... Do I have to install the SATA HD first and SATA DVD second, or does it matter in what order? ...
    (alt.comp.periphs.mainboard.asus)
  • Re: root disk moves from PATA to SATA
    ... hardware to an Athlon 64 Dual Core. ... The new motherboard has SATA ... connectors for the hard-drives (also has a PATA connector but that will ...
    (Fedora)