bluetooth and Sony Ericsson - remote control

Hello,

I have Sony Ericsson k800i and USB Bluetooth plugged into my PC.
I use Slackware Linux, current, kernel 2.6.19.2 - bluetooth enabled as
modules.

I'm trying to estabilish connection between mobile phone and PC to
control remotely my mplayer and/or xmms.

I've compiled installed bluez packages.

I set up hci0 interface by hciconfig hci0 up. Then 'hciconfig -a'
shows:

hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING
RX bytes:85 acl:0 sco:0 events:9 errors:0
TX bytes:33 acl:0 sco:0 commands:9 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'ISSCBTA'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP
Subver: 0x1fe
Manufacturer: Integrated System Solution Corp. (57)

'hcitool scan' shows:
Scanning ...
00:18:13:9E:61:CB K800i googie

When I try to let my phone control my mouse, I try:
hidd --connect 00:18:13:9E:61:CB

After short while I get message on phone with question if I want to
allow my PC to be controlled by phone. I Agree, then I'm asked for
PIN, I enter '0000' - that's what I've set temporary - for testing.

Then nothing happens. hidd waits a while, then exists. Phone tells that
bluetooth couldn't estabilish a connection. That's all.


What might be the problem? What more informations shell I provide to
help you helping me? :)

Thanks!
--
Pozdrawiam (Regards)!
Googie
.

Relevant Pages

  • Blank Piece of Paper: Bluetooth Controlled Motor
    ... The basic gist of what I want to accomplish is a rechargeable battery ... powered motor whose speed is controlled via software which is itself ... controlled remotely via a bluetooth connection to a PC, Phone, ... Some kind of circuitry to control the battery, its output, and its ...
    (comp.arch.embedded)
  • Re: Simple Question about Bluetooth Printing
    ... I set up to print over Bluetooth, the second, how do I print a textbox. ... find the .NET LinePrinter component. ... from the control, and use the LinePrinter Write commands to send the ... The second option would be to capture the control as a bitmap file and ...
    (microsoft.public.pocketpc.developer)
  • Re: Help! Needing hint on Microcontroller
    ... Receivers I want to design a Bluetooth using, ... control. ... transmitter has to display these info's on both analoguous and digital ... How will you be communicating with the Bluetooth module without the windows driver? ...
    (sci.electronics.design)
  • Re: Blank Piece of Paper: Bluetooth Controlled Motor
    ... The basic gist of what I want to accomplish is a rechargeable battery ... powered motor whose speed is controlled via software which is itself ... controlled remotely via a bluetooth connection to a PC, Phone, ... Some kind of circuitry to control the battery, its output, and its ...
    (comp.arch.embedded)
  • Re: Help! Needing hint on Microcontroller
    ... >Receivers I want to design a Bluetooth using, microcontroller based remote ... >control. ... >transmitter has to display these info's on both analoguous and digital ... Are you suggesting Bluetooth as the ground-to-plane link? ...
    (sci.electronics.design)