Re: Samsung 320GB transfer problem
ziemo1@xxxxx wrote:
<snip>
hdparm -d 1 /dev/hdb
/dev/hdb:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
Anoter new information:
Smaller disk (samsung 40G, master) doesn't use DMA as well:
hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 78242976, start = 0
wibble... OK, so it is a PATA drive, not a SATA (hdb would be sd?
otherwise). I assume this is Linux 2.6 (I don't know Slackware, only
redhat/debian derivatives).
It pongs of a lack of proper IDE driver support in the kernel for this
mobo - wondering is your system has failed to load one of the kernel
modules, perhaps something with "via" in the name?
Other than that, I don't know what to suggest - sorry.
Good luck,
Tim
.
Relevant Pages
- Re: Partitioning a reformatted Maxtor 91000D8 (9539 MB) recognizes only 2008 MB
... It is a slave disk to a master which ... I moved it from another machine over a week ago where it was the master ... Thanks for the suggestion to search Google on how to report CHS values to ... > report the right CHS values to the kernel ...
(comp.os.linux.setup) - Re: Software RAID-5 attempt to access beyond end of device...
... The reiserfs is on top of an lvm2 on top of a raid5 ... >information that has previously been stored on disk. ... Sep 7 20:32:04 cu kernel: Buffer I/O error on device dm-0, ... PCI: PCI BIOS revision 2.10 entry at 0xf1150, ...
(Linux-Kernel) - Re: Spontaneous reboots
... yet I keep experiencing spontaneous reboots and crashes. ... > I have postfix handling mail and use cyrus-imap with virtual ... Page fault while in kernel mode ... > Disk errors: ...
(freebsd-questions) - athlon-xp + fakeraid regression
... The build completes fine, the kernel boots fine, the machine will seem to be fine as long as it remains quiescent. ... At the beginning, just after hitting enter on the make command, one of the ad4 disk light goes on solid for several seconds. ... There is a well known thing where these cheap pata fakeraid cards will try to do ata133 if the drive says it can, when really, even if he drives are new ata133 drives and the cables are new and short and shielded, you still shouldn't try to do ata133 since the spec is too tight and you'll just get bit errors or other failures. ... The fix is use ata100 somehow, either by disabling dma entirely in loader.conf (since you have no more selective option there, and the raid card bios never has an option for controlling pio/dma mode like motherboard bios's have) and then use atacontrol in rc.early to set udma5, or by using disks that can only do ata100 and only advertise ata100 to the controller. ...
(freebsd-current) - Re: F8 k3b problem or just random glitch?
... I must have been thinking of the last dvd I burnt. ... led went out the last time and a what do we do with this new disk requester had ... but to me a file manager is a 2 pane operation ala mc. ... All this BTW with kernel 2.6.26-rc6 doing the chores. ...
(Fedora) |
|
