USB DVD writer

I have Fedora Core 6

Does it support USB mounted DVD burners?

I have a MadDog Multimedia external DVD burner and it is not detected by sb

I found this in /var/log/messages:

Mar 30 20:02:08 client kernel: USB Universal Host Controller Interface
driver v3.0
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt Link [LNKC] enabled at
IRQ 4
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link
[LNKC] -> GSI 4 (level, low) -> IRQ 4
Mar 30 20:02:08 client kernel: uhci_hcd 0000:00:0d.0: UHCI Host Controller
Mar 30 20:02:08 client kernel: uhci_hcd 0000:00:0d.0: new USB bus
registered, assigned bus number 1
Mar 30 20:02:08 client kernel: uhci_hcd 0000:00:0d.0: irq 4, io base
0x0000d000
Mar 30 20:02:08 client kernel: usb usb1: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: hub 1-0:1.0: USB hub found
Mar 30 20:02:08 client kernel: hub 1-0:1.0: 2 ports detected
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt Link [LNKD] enabled at
IRQ 11
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link
[LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 30 20:02:08 client kernel: uhci_hcd 0000:00:0d.1: UHCI Host Controller
Mar 30 20:02:08 client kernel: uhci_hcd 0000:00:0d.1: new USB bus
registered, assigned bus number 2
Mar 30 20:02:08 client kernel: uhci_hcd 0000:00:0d.1: irq 11, io base
0x0000d400
Mar 30 20:02:08 client kernel: usb usb2: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: hub 2-0:1.0: USB hub found
Mar 30 20:02:08 client kernel: hub 2-0:1.0: 2 ports detected
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt 0000:00:02.2[D] -> Link
[LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 30 20:02:08 client kernel: ohci_hcd 0000:00:02.2: OHCI Host Controller
Mar 30 20:02:08 client kernel: ohci_hcd 0000:00:02.2: new USB bus
registered, assigned bus number 3
Mar 30 20:02:08 client kernel: ohci_hcd 0000:00:02.2: irq 11, io mem
0xcfffe000
Mar 30 20:02:08 client kernel: usb usb3: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: hub 3-0:1.0: USB hub found
Mar 30 20:02:08 client kernel: hub 3-0:1.0: 3 ports detected
Mar 30 20:02:08 client kernel: usb 1-1: new full speed USB device using
uhci_hcd and address 2
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt Link [LNKH] enabled at
IRQ 10
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt 0000:00:02.3[A] -> Link
[LNKH] -> GSI 10 (level, low) -> IRQ 10
Mar 30 20:02:08 client kernel: ohci_hcd 0000:00:02.3: OHCI Host Controller
Mar 30 20:02:08 client kernel: ohci_hcd 0000:00:02.3: new USB bus
registered, assigned bus number 4
Mar 30 20:02:08 client kernel: ohci_hcd 0000:00:02.3: irq 10, io mem
0xcffff000
Mar 30 20:02:08 client kernel: input: ImExPS/2 Logitech Explorer Mouse
as /class/input/input2
Mar 30 20:02:08 client kernel: usb usb4: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: hub 4-0:1.0: USB hub found
Mar 30 20:02:08 client kernel: hub 4-0:1.0: 3 ports detected
Mar 30 20:02:08 client kernel: usb 1-1: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: libusual: request for usb-storage succeeded,
but module is not present
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt Link [LNKA] enabled at
IRQ 5
Mar 30 20:02:08 client kernel: ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link
[LNKA] -> GSI 5 (level, low) -> IRQ 5
Mar 30 20:02:08 client kernel: ehci_hcd 0000:00:0d.2: EHCI Host Controller
Mar 30 20:02:08 client kernel: ehci_hcd 0000:00:0d.2: new USB bus
registered, assigned bus number 5
Mar 30 20:02:08 client kernel: ehci_hcd 0000:00:0d.2: irq 5, io mem
0xcfffdf00
Mar 30 20:02:08 client kernel: ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI
1.00, driver 10 Dec 2004
Mar 30 20:02:08 client kernel: usb usb5: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: hub 5-0:1.0: USB hub found
Mar 30 20:02:08 client kernel: hub 5-0:1.0: 4 ports detected
Mar 30 20:02:08 client kernel: usb 1-1: USB disconnect, address 2
Mar 30 20:02:08 client kernel: usb 5-1: new high speed USB device using
ehci_hcd and address 2
Mar 30 20:02:08 client kernel: usb 5-1: configuration #1 chosen from 1
choice
Mar 30 20:02:08 client kernel: libusual: request for usb-storage succeeded,
but module is not present

Mar 30 20:02:08 client kernel: SCSI subsystem initialized
Mar 30 20:02:08 client kernel: Initializing USB Mass Storage driver...
Mar 30 20:02:08 client kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Mar 30 20:02:08 client kernel: usbcore: registered new interface driver
usb-storage
Mar 30 20:02:08 client kernel: USB Mass Storage support registered.

Mar 30 20:02:23 client kernel: usb 5-1: reset high speed USB device using
ehci_hcd and address 2
Mar 30 20:02:23 client kernel: usb 5-1: reset high speed USB device using
ehci_hcd and address 2

Mar 30 20:02:33 client kernel: usb 5-1: reset high speed USB device using
ehci_hcd and address 2
Mar 30 20:02:33 client kernel: scsi 0:0:0:0: scsi: Device offlined - not
ready after error recovery

Thanks

--
Dancin in the ruins tonight
Tayo'y Mga Pinoy
.

Relevant Pages