USB bus fails to see devices
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxxxxxxxxx>
- Date: 12 Jul 2007 14:43:49 -0400
I've been able to use all my USB devices (camera, scanner, printer,
bub, etc.), but at one point that I can't associate with any even, two
devices (camera and scanner) no longer seen.
$ uname -a
Linux teufel 2.6.18-4-686 #1 SMP Wed May 9 23:03:12 UTC 2007 i686
GNU/Linux
$ apt-show-versions udev
udev/etch uptodate 0.105-4
The printer and scanner are connected to the root hub, but the printer
works. A camera, usb-key and usb external hard disk are connected to
an external hub, but only the camera does not work. I disconnected
irrelevant devices to eliminate any usb bus power issues. and so it
seems the bus and cables are OK.
However, the bus does not see my Canon camera and Epson scanner, while
it does see a Western Digital USB external HD, a Lexar USB-key, a
Genesys USB hub, and a Lexmark printer:
$ lsusb
Bus 002 Device 011: ID 1058:0701 Western Digital Technologies, Inc.
Bus 002 Device 009: ID 05dc:a400 Lexar Media, Inc.
Bus 002 Device 002: ID 05e3:0605 Genesys Logic, Inc. USB 2.0
Hub [ednet]
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 043d:0052 Lexmark International, Inc.
Bus 001 Device 001: ID 0000:0000
Likewise, in /var/log/syslog, when the printer or camera is replugged,
there is no report of it there at all.
The module list looks OK to me.
$ lsmod | grep 'usb\|hci'
usb_storage 71840 0
usblp 12768 0
scsi_mod 124168 6 usb_storage,sbp2,sd_mod,libata,
aic79xx,scsi_transport_spi
ehci_hcd 28136 0
ohci1394 30800 0
ieee1394 86904 3 sbp2,eth1394,ohci1394
ohci_hcd 18276 0
ide_core 110504 4 usb_storage,ide_cd,amd74xx,generic
usbcore 112644 5 usb_storage,usblp,ehci_hcd,ohci_hcd
When I was runing Woody, stock kernel 2.4, I had something like:
$ more /proc/bus/usb/drivers
usbdevfs
hub
0- 15: usblp
but with Etch, stock kernel 2.6 I have no such directory. Not sure
why.
I'm having trouble understanding
$ dmesg | grep -i usb
for it looks like my printer and USB mass storage devices aer loaded
multiple times.
Should I have seen a /proc/bus/usb/drivers directory with some drivers
in it? Given the above, where is it likely the problem lies?
--
Haines Brown, KB1GRM
.
- Follow-Ups:
- Re: USB bus fails to see devices
- From: Rodney
- Re: USB bus fails to see devices
- Prev by Date: SAA7134 alsa module
- Next by Date: Re: SAA7134 alsa module
- Previous by thread: SAA7134 alsa module
- Next by thread: Re: USB bus fails to see devices
- Index(es):
Relevant Pages
|
