Re: ? four port NIC - Unknown if this is configured?



On Aug 25, 10:45 am, "Steve Wolfe" <h...@xxxxxxxxx> wrote:
We have a new server (Fedora Core 5) with a four port Intel NIC card.
The CD that came with the card has a driver for the e1000 gb card.
Below is the list from the "locate e1000" command.

Try this:

dmesg | grep e1000

And see if your kernel hasn't already found it and used the e1000 driver
that came with FC5. If not, try "modprobe e1000". The e1000 drivers have
come with all kernels from RedHat for quite some time.

steve

I did this (dmesg | grep e1000) in the /etc directory and found no
result.

Brad

.



Relevant Pages

  • Re: fglrx question
    ... party ati 9200SE 128mb card. ... As I recall, support for older ATI ... cards was dropped in a fairly recent driver update. ... kernel module for you on the fly as part of the boot process - for this ...
    (Fedora)
  • Re: o2Micro PCMCIA Controller Not Working in Linux - Gentoo 2004.1 - Kernel 2.6.5 - Likely a driver
    ... tweaking to get things working just so and keeping my kernel ... > card and chipset), I got my Broadcom wireless card working with a ... > compile with PCMCIA bus support and yenta-cardbus compatibility since ... > controller) or which driver to use to operate that slot. ...
    (comp.os.linux.setup)
  • Re: o2Micro PCMCIA Controller Not Working in Linux - Gentoo 2004.1 - Kernel 2.6.5 - Likely a driver
    ... tweaking to get things working just so and keeping my kernel ... > card and chipset), I got my Broadcom wireless card working with a ... > compile with PCMCIA bus support and yenta-cardbus compatibility since ... > controller) or which driver to use to operate that slot. ...
    (comp.os.linux.portable)
  • Re: tvtime does not work
    ... I have copyed only a few lines out lsmod; lspci and dmesg. ... bttv: Bt8xx card found. ... Uniform CD-ROM driver Revision: 3.20 ...
    (Fedora)
  • Re: [SLE] Suse 9.1 3Com 3c59x cant get to the network
    ... > This is an indication that the problem is with the 2.6 kernel module. ... > The kernel guys changed the driver interface in 2.6, ... I deleted the settings for the card as suggested. ... I rebooted into windows on the same machine (you recall I'm ...
    (SuSE)