Re: System Won't Power Up Anymore



On 22 Oct 2007 15:05:23 GMT, nobody@xxxxxxx (Kevin the Drummer) wrote:

Back in the summer I could power off my computer and come back hours or
days later and turn it on with everything being fine. A month ago,
maybe when the weather started getting cooler, the system beeped at me
when I turned it on. I found that the fan speed monitor was set for a
fan speed higher than what was running and that the changing the fan
speed lower limit to allow it to spin slower would keep the warning
beeps quiet. If figure that this is OK since the hottest thing in my
system, even during the summer, is only 44C. After saving my change in
my BIOS all was well, that is until weeks later when I shut down for a
couple days again. The beeps were back and my BIOS seemed to need to be
rewritten, and all was OK again, or so I thought. I shut the computer
off while out of town for the weekend. Now it won't power up again.
This time it won't even activate the monitor, so I can't get to the
BIOS.

Help? What can I do?

My system motherboard is an ABIT AV8-3rd Eye running an Athlon 64-X2.

Thanks.....

You probably should not have relied on the 44C.

Try jumpering the CMOS setup to clear it. Read your MoBo manual.

If the computer still fails to POST, then you can try removing and
reinstalling all the pieces (RAM, CPU. cards, Etc) trying first to get
a boot with nothing (including HDs) other than CPU and RAM. When the
parts really are OK, I have had decent luck R&Ring the CPU.

But it sure sounds like you fried something.
--buck


.



Relevant Pages

  • Re: New M2A-VM HDMI, Cant get it to start
    ... As I had the screen paused to read off the BIOS version, ... owners manual says for RAM sockets (one stick in A1, ... Now the lights come on, the drives start spinning, but no video comes ... CPU, heatsink/fan, motherboard, no RAM, no video, no disk, computer ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Bios showing wrong CPU
    ... Socket 775 FSB800 CPU. ... the BIOS screen with a message sayinh. ... Oh and taking out the RAM makes no difference - I cannot remember ...
    (uk.comp.homebuilt)
  • Re: KFSN4 malfunction ?
    ... it did not work and the CPU Warning light on the MB indicated that CPU1 was "missing". ... I took it out and installed only the second CPU on CPU1 socket. ... If you suspect your symptoms are purely due to the choice of BIOS ... is to remove all RAM. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: System Wont Power Up Anymore
    ... my change in my BIOS all was well, ... and reinstalling all the pieces (RAM, ... first to get a boot with nothing other than CPU ... there some way to verify system temperatures? ...
    (comp.os.linux.hardware)
  • Re: Random restarts
    ... The RAM on the CPU had failed. ... My machine will either restart itself during the startup when it ... I flashed the BIOS and no change. ...
    (microsoft.public.windowsxp.general)