Re: System Won't Power Up Anymore



buck <buck@xxxxxxxxxxx> wrote:
On 22 Oct 2007 15:05:23 GMT, nobody@xxxxxxx (Kevin the Drummer) wrote:

Back in the summer I could power off my computer and come
back hours or days later and turn it on with everything being
fine. A month ago, maybe when the weather started getting
cooler, the system beeped at me when I turned it on. I found
that the fan speed monitor was set for a fan speed higher than
what was running and that the changing the fan speed lower
limit to allow it to spin slower would keep the warning beeps
quiet. If figure that this is OK since the hottest thing in
my system, even during the summer, is only 44C. After saving
my change in my BIOS all was well, that is until weeks later
when I shut down for a couple days again. The beeps were
back and my BIOS seemed to need to be rewritten, and all was
OK again, or so I thought. I shut the computer off while out
of town for the weekend. Now it won't power up again. This
time it won't even activate the monitor, so I can't get to the
BIOS.

Help? What can I do?

My system motherboard is an ABIT AV8-3rd Eye running an Athlon
64-X2.

You probably should not have relied on the 44C.

I'm not sure what you're getting at. Do you think that the
system could be giving me invalid info on the temperatures?

Try jumpering the CMOS setup to clear it. Read your MoBo
manual.

OK.

If the computer still fails to POST, then you can try removing
and reinstalling all the pieces (RAM, CPU. cards, Etc) trying
first to get a boot with nothing (including HDs) other than CPU
and RAM. When the parts really are OK, I have had decent luck
R&Ring the CPU.

Divide & conquer. Sounds like a plan. I'll try that.

But it sure sounds like you fried something.

Drag. That's maybe what you meant by not relying on 44C. Is
there some way to verify system temperatures?

Thanks for the advice....

--
PLEASE post a SUMMARY of the answer(s) to your question(s)!
Show Windows & Gates to the exit door.
Unless otherwise noted, the statements herein reflect my personal
opinions and not those of any organization with which I may be affiliated.
.



Relevant Pages

  • Re: New M2A-VM HDMI, Cant get it to start
    ... As I had the screen paused to read off the BIOS version, ... owners manual says for RAM sockets (one stick in A1, ... Now the lights come on, the drives start spinning, but no video comes ... CPU, heatsink/fan, motherboard, no RAM, no video, no disk, computer ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Bios showing wrong CPU
    ... Socket 775 FSB800 CPU. ... the BIOS screen with a message sayinh. ... Oh and taking out the RAM makes no difference - I cannot remember ...
    (uk.comp.homebuilt)
  • Re: KFSN4 malfunction ?
    ... it did not work and the CPU Warning light on the MB indicated that CPU1 was "missing". ... I took it out and installed only the second CPU on CPU1 socket. ... If you suspect your symptoms are purely due to the choice of BIOS ... is to remove all RAM. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Random restarts
    ... The RAM on the CPU had failed. ... My machine will either restart itself during the startup when it ... I flashed the BIOS and no change. ...
    (microsoft.public.windowsxp.general)
  • Re: Would a 2nd processor really be a waste of time???? help
    ... > buy another processor and more ram, however this is what one supplier ... > Your server has only 1 processor. ... installation including changing the bios settings and installing the smp ... The second cpu will probably help ...somewhat. ...
    (comp.unix.sco.misc)