Trouble writing CD-R from DVD recorder

I have an LG DVD recorder that supports a whole pile of formats, including CD-R and CD-RW.
The drive can read/write anything except the CD-R and CD-RW. Every time I try to record
to CD-R I get this:
----------
# cdrecord -v dev=ATAPI:1,1,0 speed=16 image.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005 Jörg Schilling
NOTE: This version contains the OSS DVD extensions for cdrtools and thus may
have bugs related to DVD issues that are not present in the original
cdrtools. Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla The original cdrtools author should
not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:1,1,0'
devname: 'ATAPI'
scsibus: 1 target: 1 lun: 0
Use of ATA is preferred over ATAPI.
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD+-RW GWA4164B'
Revision : 'D108'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0000
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
FIFO size : 4194304 = 4096 KB
Track 01: data 97 MB
Total size: 111 MB (11:02.89) = 49717 sectors
Lout start: 111 MB (11:04/67) = 49717 sectors
cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 3A 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
#
------------------------------

I can write to DVD-Rs no problem, etc. And I can read CD-R and CDs without problem.

Anyone know what might cause this?

Thanks.
.

Relevant Pages

  • problem writing dvd
    ... I've used happily used cdrecord to record CDROMs under linux for some ... intending to create a DVD of snv-b36. ... Profile: 0x002B ... Profile: DVD-R/DL sequential recording ...
    (comp.unix.solaris)
  • Re: can burn cds but not dvds on F8
    ... I am using cdrecord on F8, ... wodim: No write mode specified. ... Profile: 0x001B ... 12430 kB/s 70x CD 8x DVD ...
    (Fedora)
  • Ubuntu 6.06; Pioneer DVDR-111 - wont write CDR media?
    ... My DVD recorder says it will write CDs too. ... Writing to the CD with cdrecord doesn't work either, ... Please send bug reports and support requests to ... Profile: 0x002B ...
    (Ubuntu)
  • NEC3500A
    ... I recently bought a dual layer DVD ... This version is an unofficial version with DVD support ... The author of cdrecord is not to be bothered with problems in this ... Profile: 0x002B ...
    (alt.os.linux.suse)
  • [SLE] Simulation mode ignored.
    ... I bought recently a dvd recorder, an LG GSA-4160B model (16X Super Multi ... cdrecord: Found DVD media: using cdr_mdvd. ... Profile: 0x0011 ... Turning BURN-Free off ...
    (SuSE)