Re: 1-way modem

In article <87fxvc8rq2.fld@xxxxxxxxxx>,
Floyd L. Davidson <floyd@xxxxxxxxxx> wrote:
Looking at a working case, I see that stty -a < /dev/ttyS0 (the modem
port) looks the same, and setserial -a /dev/ttyS0 is basically the same

ttyS0 should be IRQ 4, port 0x03f8.

That it is:

setserial -a /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test

(Also tried the autoconfig, and this didn't change anything.)
.

Relevant Pages