Ataptec SCSI card problem

Hi,
does anyone know what is the problem with this scsi card?
I tried to install this card debian 4.0, ubuntu 7.10, Fedora Core 8,
Slackware 12 and I have always the same message from scsi card.
Under win2k3 works perfect.

Now I installed Redhat Enterprise WS 4.4, I installed adaptec 29320ALP
drivers for Redhat Enterprise WS 4.4. To this scsi card I have connected
Vtrak Promise 310p with 3 LUNs.Server is HP Proliant 360 G5.
Adaptec 29320ALP is supported by HP, Vtrak Promise 310p and Redhat
Enterprise Ws4.4.

This is the error message :

scsi0: Recovery Initiated - Card was not paused
Dump Card State Begins
<<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x1d Mode 0x33
INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x16]
KERNEL_QFREEZE_COUNT[0x16] MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff] SSTAT0[0x10] SSTAT1[0x8] SSTAT2[0x0]
SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0]
LQISTAT1[0x0] LQISTAT2[0x80] LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0x40]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 188 qinfifonext = 188
QINFIFO:
WAITING_TID_QUEUES:
0 ( 0x3 )
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
Total 1
Kernel Free SCB list: 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:


scsi0: FIFO0 Free, LONGJMP == 0x826b, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]

scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi0: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102
scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff39
CDB 28 0 0 0 0 3f
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Host Status: Failed(0)
DevQ(0:0:0): 0 waiting
DevQ(0:0:1): 0 waiting
DevQ(0:0:2): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
(scsi0:A:0:0): SCB 0x3 - timed out
(scsi0:A:0:0): Other SCB Timeout
(scsi0:A:0:0): No other SCB worth waiting for...
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
.

Relevant Pages

  • Adaptec scsi 29320ALP U320 problem
    ... I tried to install this card debian 4.0, ubuntu 7.10, Fedora Core 8, ... Slackware 12 and I have always the same message from scsi card. ... Sequencer Complete DMA-inprog list: ... DevQ: 0 waiting ...
    (linux.redhat)
  • NIC issue on 2003 SBS
    ... I manage a Windows 2003 SBS server for a company and recently tried to ... install l scsi card, when the system "crashed" What happened was that after ... I removed the installed SCSI card and the same behavior ... At this point I was able to go into network ...
    (microsoft.public.windows.server.sbs)
  • Re: Ultra 10 - no output to monitor
    ... Flatulous Maximus wrote: ... system) and install the OS stripped bare on it, ... 375-0005 SCSI card and inserted it in a PCI slot. ... Jeff said he's been using this SCSI card in Ultra 10s with no problem, ...
    (comp.sys.sun.hardware)
  • Re: Ultra 10 - no output to monitor
    ... system) and install the OS stripped bare on it, ... 375-0005 SCSI card and inserted it in a PCI slot. ... Jeff said he's been using this SCSI card in Ultra 10s with no problem, ... of four jumpers on the riser card that are all set to 1-2. ...
    (comp.sys.sun.hardware)
  • Re: Copying a IIGS volume on a Zip Disk to a PC
    ... As I still don't have a SCSI card yet, I'm trying to find a way to copy several 32 meg volumes from Zip disks to my PC. ... Perhaps its the Zip driver that's making all the fuss. ... I do have SCSI Zip drives, and a PCI SCSI card, but I'm reluctant to install it in my PC for just this one exercise. ... Just create a recovery point and do your install (actually, ...
    (comp.sys.apple2)