switched motherboard -> can't use CD-RW
From: Chieh Cheng (gypsymoth_at_mindless.com)
Date: 12/30/03
- Next message: Lenard: "Re: switched motherboard -> can't use CD-RW"
- Previous message: Silviu Minut: "Re: apt-get query | semi-newbie | stat source pacakges??"
- Next in thread: Lenard: "Re: switched motherboard -> can't use CD-RW"
- Reply: Lenard: "Re: switched motherboard -> can't use CD-RW"
- Reply: Markus Kossmann: "Re: switched motherboard -> can't use CD-RW"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 29 Dec 2003 18:31:42 -0800
Ok, I switched motherboard and a new hard disk a week ago, installed a
fresh copy of RedHat Linux 8 and now the CD-RW no longer works. This
CD-RW worked a week ago under RedHat Linux 8 with the previous
motherboard and hard disk. Now, when I put in a disc (any disc blank
or with data), it just keeps blinking. RedHat 8 seems to recognize the
drive, but can't mount and none of the CD writer software works. I am
baffled to what is the cause of the problem. Please advice on what to
do . . . Thanks.
cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg
Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
are root.
hdparm /dev/hdd
/dev/hdd:
HDIO_GET_MULTCOUNT failed: Invalid argument
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 1 (on)
readahead = 8 (on)
HDIO_GETGEO failed: Invalid argument
dmesg
Linux version 2.4.18-14 (bhcompile@astest.test.redhat.com) (gcc
version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11
EDT 2002
. . .
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
. . .
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev a1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:14.1
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:DMA
hda: WDC WD1200JB-00DUA3, ATA DISK drive
hdd: 48X12X50 CD-RW 1.02 20021009, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63,
UDMA(66)
. . .
Partition check:
hda: hda1 hda2 hda3
. . .
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
. . .
cdrom: This disc doesn't have any tracks I recognize!
Chieh
-- Camera Hacker - http://Chieh.CameraHacker.com/
- Next message: Lenard: "Re: switched motherboard -> can't use CD-RW"
- Previous message: Silviu Minut: "Re: apt-get query | semi-newbie | stat source pacakges??"
- Next in thread: Lenard: "Re: switched motherboard -> can't use CD-RW"
- Reply: Lenard: "Re: switched motherboard -> can't use CD-RW"
- Reply: Markus Kossmann: "Re: switched motherboard -> can't use CD-RW"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
