Re: Epson DX6000 Card Reader
- From: Bill Marcum <marcumbill@xxxxxxxxxxxxx>
- Date: Thu, 31 May 2007 15:14:18 GMT
On Thu, 31 May 2007 13:46:29 GMT, munky
<mk@xxxxxx> wrote:
Hi,
I've recently bought an Epson DX6000 all in one printer/scanner/copier.
So far I've been pretty fortunate and got a bunch of drivers from
epson's site and so I can merrily print and scan on my RH EL4.0 box
however.... unfortunately I can't seem to get the memory card reader to
work.
When I do dmesg after I power up the printer I get
usb 2-3: new high speed USB device using address 5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 1
alt 0 proto 2 vid 0x04B8 pid 0x082E
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: EPSON Model: Stylus Storage Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1000448 512-byte hdwr sectors (512 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0d 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 1000448 512-byte hdwr sectors (512 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0d 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0
USB Mass Storage device found at 5
Si I'd assume all should be well however when I cat /etc/fstab the magic
USB hotplug auto fstab updater doesn't seem to have done it's magic (it
works fine when I plug my camera in - for my camera I get the line
/dev/sdc1 /media/usbdisk vfat
pamconsole,noatime,sync,fscontext=system_u:object_r:removable_t,exec,noauto,managed
0 0
added to my fstab, it magically creates a mount point and all is tickety
boo)
I've tried to do a brute force manual mount "mount -t vfat /dev/sdb1
/mnt/usbdisk1" but I get "mount: special device /dev/sdb1 does not
exist" reported, which rather seems to conflict with what dmesg is
telling me.
I'd appreciate any thoughts and pointers in the right direction,
Cheers,
Fraser
Check /var/log/messages and /var/log/syslog for any other messages
regarding sdb. You should see messages when you insert or remove a card
in the card reader.
--
Non-Reciprocal Laws of Expectations:
Negative expectations yield negative results.
Positive expectations yield negative results.
.
- References:
- Epson DX6000 Card Reader
- From: munky
- Epson DX6000 Card Reader
- Prev by Date: Re: an_error
- Next by Date: Re: Only some websites will open - Ubuntu
- Previous by thread: Epson DX6000 Card Reader
- Index(es):
Relevant Pages
|
