Re: usb-storage "Bulk command transfer result=-104" in kernel 2.4.36

mike :
Hi All,

I have following errors during USB memory stick read/write. The system
I am using is 2.4.36, USB is working under EHCI driver. Then the USB
is hung. The system is OK, I can still login from another terminal.

Any idea on this issue?

Thanks for your help,

Mike


usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x18922 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 10 85 00 00 20 00 bd 30
usb-storage: Bulk command S 0x43425355 T 0x18923 Trg 0 LUN 0 L 16384 F
128 CL 10
usb-storage: command_abort() called
usb-storage: Bulk command transfer result=-104
usb-storage: -- transport indicates command was aborted
usb-storage: Bulk reset requested

Looks like a wee prob with the NForce2 chipset. Are you using that?

--
I'm shaving!! I'M SHAVING!!

www.websterscafe.com
.

Relevant Pages

  • Re: [Patch] Fix oops on rmmod usb-storage
    ... >>SCSI drivers I've tested too. ... Attached is the full trace (including USB ... usb-storage: usb_stor_stop_transport called ... usb-storage: No command during disconnect ...
    (Linux-Kernel)
  • USB DVD-RW not detected
    ... Below is what dmesg (with usb debug output) shows. ... hub 1-0:1.0: usb_probe_interface ... hub 1-0:1.0: unknown reserved power switching mode ... usb-storage: ...
    (comp.os.linux.hardware)
  • 2.6.9-rc3: kernel BUG at drivers/block/as-iosched.c:1853!
    ... usb-storage: ... usb-storage: Bulk command transfer result=4 ... usb-storage: *** thread sleeping. ... The camera was turned on so it got detected on USB immediately. ...
    (Linux-Kernel)
  • problem with etchnhalf on toshiba a305-s6857
    ... ACPI: DMI detected: Toshiba ... Allocating PCI resources starting at c4000000 (gap: ... usbcore: ... usb-storage: waiting for device to settle before scanning ...
    (Debian-User)
  • Re: [BUG] 2.6.24-git usb reset problems
    ... Where you able to figure out which usb storage transport is used? ... usb-storage: ... usb-storage: queuecommand called ... usb-storage: Bulk command transfer result=0 ...
    (Linux-Kernel)