Re: usb-storage "Bulk command transfer result=-104" in kernel 2.4.36

On 2008-02-27, mike <mail4mz@xxxxxxxxx> wrote:


Hi All,

I have following errors during USB memory stick read/write. The system
I am using is 2.4.36, USB is working under EHCI driver. Then the USB
is hung. The system is OK, I can still login from another terminal.

Any idea on this issue?

Try a 2.6 kernel?

.

Relevant Pages

  • usb questions
    ... server hung (during a Veritas Exchange agent backup). ... keyboard in and it was still hung so I had to do a hard boot. ... neither usb port will recognize a keyboard or mouse. ... I was considering adding a usb hard drive to this server as an added ...
    (microsoft.public.windows.server.sbs)
  • Re: lexar jumdrive problems
    ... it hung at the screen after the boot manager. ... hitting F2 so I could see the messages, I saw that it was during USB ... Jun 22 11:31:41 DS9 kernel: sda: assuming drive cache: write through ...
    (alt.os.linux.suse)
  • Re: usb-storage "Bulk command transfer result=-104" in kernel 2.4.36
    ... USB is working under EHCI driver. ... is hung. ... I can still login from another terminal. ...
    (comp.os.linux.misc)
  • AMD64 and NFORCE3 250GB very slow and USB hungs
    ... When I use the latest kernel from Andrew on boot it ... sometimes hung on boot and the reset state of system is wrong so a have ... to power of the system until usb will work again..at probing the usb ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)
  • Re: [SLE] Hardware detection...??!!
    ... In my installation, I have found any storage device that is hung on the ... usb bus seems to hang the system up. ... On Fri, 2004-06-11 at 08:34, Terry Bassett wrote: ...
    (SuSE)