Re: usb-storage "Bulk command transfer result=-104" in kernel 2.4.36
- From: mike <mail4mz@xxxxxxxxx>
- Date: Wed, 27 Feb 2008 20:20:19 -0800 (PST)
On Feb 26, 10:23 pm, Shadow_7 <wwwShad...@xxxxxxxxxxxxxxx> wrote:
I have following errors during USB memory stick read/write. The system
I am using is 2.4.36, USB is working under EHCI driver. Then the USB
is hung. The system is OK, I can still login from another terminal.
On my 2GB stick, I can only transfer 256 unique filenames. Something with
mkdosfs and Fat 16. Might apply, might not. Try making a .iso, .zip,
.gz, .bz2, .tar file of what you're moving, and see if that helps.
Although 2.4.x has been out of whack for a while. You might try going
with a 2.6.x kernel. Lots of things have NOT been backported. Some of
which might be needed to operate with in the parameters that you're
expecting.
I have to stay in 2.4 kernel. I am using 1G USB memory stick, there
are only couple files on it. I am trying to duplicate a 400M file on
the memory stick. Normally the copy works fine. However if I keep
doing such operation for a long time, it will failed eventually. From
the log, it seems usb-storage: command_abort() is called before the
failure.
I enabled the EHCI only. USB controller in my system is ISP1563, the
processor I am using is MPC85xx.
Thanks,
.
- References:
- Prev by Date: Re: Backup to a USB memory stick: Some questions.
- Next by Date: download ebooks,softwares,students tutorials here for free!!
- Previous by thread: Re: usb-storage "Bulk command transfer result=-104" in kernel 2.4.36
- Next by thread: modular bashrc?
- Index(es):
Relevant Pages
|
