Re: Problem of resume from suspension
- From: fl <rxjwg98@xxxxxxxxx>
- Date: Mon, 4 Oct 2010 11:29:28 -0700 (PDT)
On Oct 4, 2:19 pm, fl <rxjw...@xxxxxxxxx> wrote:
Hi,
My laptop (Toshiba Satellite A-60. Graphics chip: ATI: RS 250 4437)
cannot resume after suspension. I check the web and find the following
posts:
. What means: "init=/bin/bash" of item 2 from the last below long
dashed line?
When I run "s2ram -i", the following message appears:
...
This machine can be identified by:
sys_vendor = "TOSHIBA"
sys_product = "Satellite A60"
sys_version = "PSA60C-JL100E"
bios_version = "Version 1.40"
Seehttp://en.opensuse.org/S2ramfor details.
...
When I run "s2ram -n", the following message appears:
...
Machine unknow
This machine can be identified by:
sys_vendor = "TOSHIBA"
sys_product = "Satellite A60"
sys_version = "PSA60C-JL100E"
bios_version = "Version 1.40"
Seehttp://en.opensuse.org/S2ramfor details.
...
From the two test, I don't know OPENSUSE has identified my laptop or
not.
Last, I don't know what is the difference from 'suspension to ram' and
'suspension to disk'. The amble LED lights the same from the outlook?
What is your suggestion on my problem?
Thanks,
...............
But there're few things that you can try:
1)There's a recent online update for the radeon/radeonhd driver. Try
running online update and see if that helps to sort out the problems.
2)You can try other s2ram options from init=/bin/bash just in case you
have not tried them yet. See S2ram#ATI_graphics_chipsets
In my case the option s2ram -f -a 3 and s2ram -f -p -m works well. If
neither works you can try other options as stated in the page. I know
it's a painful process to try each and every combination but it's
worth the try.
3)Unfortunately AMD has discontinued driver support for ATI chipset
before Radeon HD2000 series. So the latest Catalyst version you can
get for you card is 9.3. It can't be say for sure that this will work,
and would not normally recommend this, but if it works, why not?
There're other options too, such as updating to a newer opensource
radeon driver build, but that's beyond my knowledge.
Some output such as dmesg or /var/log/pm-suspend.log might be useful.
But if you find something interesting paste it to something like
pastebin and not directly to the forum
When I press power button after suspension, I hear the hard disk
rotate again, but nothing displays.
Below is the content from /var/log/pm-suspend.log:
Fri Oct 1 10:21:41 EDT 2010: performing suspend
INFO: using built-in quirks database from HAL.
INFO: S2RAM_OPTS from HAL quirks: ' 'bcore 192259 4
usbhid,ohci_hcd,ehci_hcd
fan 3539 0
processor 40311 1
ata_generic 2711 0
pata_atiixp 3564 3
libata 185684 2 ata_generic,pata_atiixp
scsi_mod 159241 4 sr_mod,sg,sd_mod,libata
thermal 17293 0
thermal_sys 14735 4 video,fan,processor,thermal
hwmon 2060 1 thermal_sys
total used free shared buffers
cached
Mem: 446364 441136 5228 0 23192
166872
-/+ buffers/cache: 251072 195292
Swap: 4192252 344 4191908
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend:success.
/usr/lib/pm-utils/sleep.d/02rtcwake suspend suspend:rtcwake alarm not
enabled in /etc/pm/config.d/rtcwake.config, doing nothing...
not applicable.
/usr/lib/pm-utils/sleep.d/06autofs suspend suspend:Shutting down
automount ..done
success.
/usr/lib/pm-utils/sleep.d/30s2disk-check suspend suspend:success.
/usr/lib/pm-utils/sleep.d/45pcmcia suspend suspend:ejecting PCMCIA
cards...
success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/50rcnetwork suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:not
applicable.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend:success.
/usr/lib/pm-utils/sleep.d/80acpi-fan suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/80videobios suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/95packagekit suspend suspend:success.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend
suspend:success.
/usr/lib/pm-utils/sleep.d/99Zgrub suspend suspend:success.
/usr/lib/pm-utils/sleep.d/99info suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/99video suspend suspend:disabled.
Fri Oct 1 10:21:41 EDT 2010: performing suspend
INFO: using built-in quirks database from HAL.
INFO: S2RAM_OPTS from HAL quirks: ' '.
.................
Could you tell me what I check next? Thanks a lot. BTW, The OPENSUSE
is just installed, version 11.3.
.
- References:
- Problem of resume from suspension
- From: fl
- Problem of resume from suspension
- Prev by Date: Re: Using monitors attached to TWO video cards together?
- Next by Date: Re: OOP and OOD for senior C-style embedded software engineers Options
- Previous by thread: Problem of resume from suspension
- Next by thread: Re: Using monitors attached to TWO video cards together?
- Index(es):
Relevant Pages
|
