RH 9.0 refuses to install a STATIC network config
From: KFWebb (kfwebb_at_mindspring.com)
Date: 07/30/03
- Next message: Ian Northeast: "Re: Mozilla can do it, why can't command-line ftp?"
- Previous message: andrew williams: "Mozilla can do it, why can't command-line ftp?"
- Next in thread: Bit Twister: "Re: RH 9.0 refuses to install a STATIC network config"
- Reply: Bit Twister: "Re: RH 9.0 refuses to install a STATIC network config"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 30 Jul 2003 13:37:16 -0700
I have installed RH 9.0 twice on the same box
and for the network config I have selected STATIC
and entered my IP address in the appropriate
text widget. After each install I am getting DHCP
entries in the routing table. I am now trying to give
the machine a 'hand-job' (wink, wink, nudge, nudge
for all of the pervs out there), and I am finding
I must be missing something. The 'Network Tool'
indicates the correct IP address and hostname,
routing table just has the loopback entry, and the
boot output indicates eth0 init is failing. Here is my
ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=X.X.X.X
NETMASK=255.255.255.0
NETWORK-X.X.X.0
BROADCAST=X.X.X.255
GATEWAY=X.X.X.1
Any ideas? What am I missing?
Thanks.
Never had this problem with RH 7.0/7.2
- Next message: Ian Northeast: "Re: Mozilla can do it, why can't command-line ftp?"
- Previous message: andrew williams: "Mozilla can do it, why can't command-line ftp?"
- Next in thread: Bit Twister: "Re: RH 9.0 refuses to install a STATIC network config"
- Reply: Bit Twister: "Re: RH 9.0 refuses to install a STATIC network config"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
