Cable modem to sunqe or sunhme card

From: Matthew (flame_at_grovemidnightsun.com)
Date: 12/23/03


Date: Tue, 23 Dec 2003 03:45:06 GMT

I'm running Debian 3 ultralinux(2.4.23) on my sparc64 machine, and get
this message over and over again as the interface going to the cable
modem goes up and down. I suspect it has to do with speed negotiation as
putting a hub between the cable modem and the server solves the problem,
but i don't want the hub there. does anyone know what I could do to get
the interface stable.
thanx
Matt
NETDEV WATCHDOG: eth1: transmit timed out
eth1: transmit timed out, resetting
eth1: Happy Status 00000000 TX[000003ff:00000101]
eth1: Link is up using internal transceiver at 10Mb/s, Half Duplex.
NETDEV WATCHDOG: eth1: transmit timed out
eth1: transmit timed out, resetting
eth1: Happy Status 00000000 TX[000003ff:00000101]
eth1: Link is up using internal transceiver at 10Mb/s, Half Duplex.



Relevant Pages

  • Re: Wireless interface stopped working in Etch
    ... The rt2500 modules seem identical on the working system and the fresh install. ... I have begun again with a new fresh install, so the wireless interface has been autmatically named 'eth1'. ...
    (Debian-User)
  • Re: [Fwd: FC9 Network Config]
    ... eth0: negotiated 100baseTx-HD, link ok ... eth1: no link ... eth2 is no link... ... Shutting down interface eth0: ...
    (Fedora)
  • SNAT/MASQUERADE with two uplink connections
    ... I have a linux box (lets call it RTR) with 3 interfaces: ... the eth1 interface, while feeding the rest of the traffic through the link ... 1.1.1.0/29 dev eth1 proto kernel scope link src 1.1.1.2 ...
    (comp.os.linux.networking)
  • Re: Wireless interface stopped working in Etch
    ... has been autmatically named 'eth1'. ... The interface on the working system remains 'wlan0'. ... AP with "iwlist wlan0 scan"? ... cells regardless of the interval between commands. ...
    (Debian-User)
  • Re: ip change on interface with subinterfaces.
    ... > eth1 is unused, and I'm only using subinterfces to route traffic. ... >>> for eth1 without having to restart the interface. ... >>> all the subinterfaces to change the ip for eth1. ... >> clear the secondaries automaticall). ...
    (comp.os.linux.networking)