Re: file transfer between Linux and XP home computers?

From: Michael Heiming (michael+USENET_at_www.heiming.de)
Date: 01/24/04


Date: Sat, 24 Jan 2004 20:52:31 +0100

Martin Blume <mblume@socha.net> wrote:
> "WWW" <ouiNOouiliSPAMouinqui@yahoo.nospam.com> schrieb
> > I'd like to be able to transfer files between my Linux (Red Hat
> > 7) and XP computers at home. Don't know how, hardware or
> > software.
[..]

> If you exchange often and big files, you'd be better off buying
> two network cards, a hub / switch, two cables and connect the two
> computers together. The process is relatively painless (don't know
[..]

Ack, but then you don't need a hub/switch with two boxes, a
crossover network cable and two NICs will work fine, the OP
should be able to get two 10MBit PCI cards for virtually nothing.

> > I can write directly to the serial port with e.g. "cat
> >/dev/ttyS0", but I think XP is expecting to receive TCP/IP
> > packets, not simple ascii transmission.

> You could use a serial null-modem cable and transfer with any
> serial modem connection program (hyperterm, minicom, kermit).

Yep, that should work, but 115000 bit/sec won't be really fast.
Getting some cheapo (+supported) NICs should be the best advice.

-- 
Michael Heiming
Remove +SIGNS and www. if you expect an answer, sorry for 
inconvenience, but I get tons of SPAM


Relevant Pages

  • Re: Problems with LAN
    ... > I have two computers. ... > eth2 is the one I want to use for my LAN. ... Not all NICs are happy with crossover connections. ... regular cables and a switch. ...
    (comp.os.linux.networking)
  • Re: Trouble with XP PCs connected by crossover
    ... >there is no help in Windows XP for setting up a network by crossover ... >neither of the computers seem to be able to see each other. ... Do you have the proper drivers for the NICs? ... Consider getting a hub, and cables. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Transfer rate
    ... First make sure that your cables are good commercial made cables. ... Check the Network cards on the computers and make sure that they are Not set to half Duplex. ... If you have Internet connection optimize the TCP/IP stack for the type of connection, it would help with local transfer too. ...
    (microsoft.public.windows.vista.networking_sharing)
  • Re: Works of Fiction and Electomagnetic Pulses
    ... the attached "video multiplexer" got slightly ... - we have some network cables between three houses, ... I had about 8 fried network cards and 3 fried switches ... alltogether about US$800 damage. ...
    (rec.humor.oracle.d)
  • Problems with LAN
    ... Computer #1 is running Mandrake 10.1 and has three NICs: ... eth2 is the one I want to use for my LAN. ... How many cables ... so am I using ping right? ...
    (comp.os.linux.networking)