Re: Can i bind two NICs to one IP?
Date: Tue, 20 Apr 2004 17:55:16 +0800
I want to achieve 2.
can you give me some details about "bonding"?
"Stephen SM WONG" <email@example.com> ????
> What do you want to achieve?
> 1. Fail over when one NIC is out of service
> 2. Load balancing with two NICs
> 3. Act as a bridge for two ethernet segments
> As I understand, 1. depends on driver implementation, 2. can
> be achieved by bonding, and 3. can be done by establishing a
> bridge (virtual) interface with two physical NICs.
> My 2 cents.
> Stephen Wong @ Hong Kong
> On Tue, 20 Apr 2004, Pan Jiaming wrote:
> > Thanks a lot!
- Re: Dual NICs
... When you mention 'networking equipment' this is the Ethernet Adapter ... so you are trying to do etherchannel bonding then. ... Subject: Dual NICs ... Attached to this server is a StorageTek 9714 tape library with 6 DLT ...
- Re: bonding
... There are a couple of issues in bonding which can bite the unsuspecting ... 2 NICs in RR mode will not give ... flow is matching source and destination MAC addresses. ...
- Re: single cable dual nic?
... If I have two cables connecting to both ports I ... port and two nics bonded to one virtual nic. ... Your board has Realtek 8111Es for NICs. ... I would expect bonding to actually make things worse with r8169-based ...
- Re: Using multiple NICs
... I thinking bonding may be a better option. ... one with the NFS server and one without the NFS server and a ... You connect the machine with an IP of 192.168.2.199 to switch B ... two NICs, then what you want to do is bonding. ...
... I've a big problem while bonding 2 nics on 2 serveurs with a Allied Telesyn switches ... 0- i unplugg the nic from the switch ... ifenslave bond0 eth1 eth2 ...