Send IP traffic to own IP address over first router/gateway

From: Achim (aliedtke_at_intec-isdn.de)
Date: 06/28/04 

Date: 28 Jun 2004 06:59:13 -0700

Hello,

I try to evaluate the performance of the link between a linux box with
one NIC and the first router/gateway (using ping, ftp, ...).

The problem: all sent IP packets to own IP address are routed local in
the box.

How is it possible to patch the kernel or modify the routing tables
that packets to own IP address treated like packets to destinations
behind the gateway/router?

Thanks.

Best wishes.

Achim

Relevant Pages

  • Re: how many 8-bit games?
    ... I ftp routinely to various sites and this is the only ... PING mirrors.kernel.org: 56 data bytes ... packets transmitted, 4 packets received, 0% packet loss ... 12 packets transmitted, 0 packets received, 100% packet loss ...
    (comp.sys.atari.8bit)
  • Re: Cant browse, ssh, or ftp but can ping and nslookup FC-3
    ... packets. ... Try ping with the -s 1500 option to try moving a larger packet. ... and ftp connect is also small. ... Also reboot with acpi=off as a boot option and see if like magic ...
    (Fedora)
  • Netgear MA401 stopped working
    ... the host, seem to be sending packets, but never receive anything back. ... PING 192.168.112.1: 56 data bytes ... I, on the other hand, suspect a hardware problem with the card. ... pci_cfgintr: 0:2 INTA BIOS irq 11 ...
    (freebsd-net)
  • Re: netcat delays between pages over wan
    ... >8000 printers. ... All that is going to show you is that ping in the default mode has ... >servers and Lantronix servers were rebooted. ... By default ping sends 56 byte packets 1 second apart. ...
    (comp.unix.sco.misc)
  • ubr924 modem does not want to talk through its ethernet0 port
    ... hostname burpmaster ... interface cable-modem0 ... input packets with dribble condition detected ... burpmaster#ping 10.0.0.13 <-- Ping my unix box, which I am using to connect to the ubr924 modem's console port. ...
    (comp.dcom.sys.cisco)