Re: Problems with LAN

deja3-user_at_bitrealm.com
Date: 09/12/05 

Date: 11 Sep 2005 18:40:14 -0700

Are you sure it's a crossover cable? If you have a crimper, you can
make your own. Check the pinouts.

With the little tang pointed away from you and the cable hanging down,
look at the back side (non-tang side). Pin 1 is on your left in this
orientation and pin 8 is on your right.

A crossover cable should have:

pin 1 to pin 3
pin 2 to pin 6
pin 3 to pin 1
pin 6 to pin 2

The rest don't matter for 100 mbit

Relevant Pages

  • Re: Any Maxim discussion Forum Members?
    ... are all sorts of issues in choosing pinouts. ... an input with a ground or power pin, ... For instance, the mask ... designer doesn't know which pins have the lowest inductance. ...
    (sci.electronics.design)
  • Re: Calrec Audio M series mixers: PQ1253-8 Mic/Line + Eq/Filter module. Mysterious Euroconn pin
    ... i owned a PQ1253 and i am looking for the pinouts. ... How can this optional i/p pair be ... Should this be permanently tied to pin 8 of card ...
    (rec.audio.tech)
  • Re: pinouts for L120AB ic
    ... I am unable to find the pinouts or a schematic for it despite ... modest cost but from examination of the damaged pc board pinouts seem to be ... Pin 1 is Input ... Pin 4 is Volt Ref ...
    (sci.electronics.components)
  • Re: pinouts for L120AB ic
    ... I am unable to find the pinouts or a schematic for it despite ... modest cost but from examination of the damaged pc board pinouts seem to be ... Pin 1 is Input ... Pin 4 is Volt Ref ...
    (sci.electronics.components)
  • Re: Tech: Vs video inverter pinouts
    ... provide a +5 VDC supply to pin 1 of the 3 pin header. ... I need to know the pinouts ... have a issue with colors on my classic and vs jamma adaptor so i ... also had issues with sound causing video to freak out ...
    (rec.games.video.arcade.collecting)