Re: Gigabit Hub suggestion

From: Rick Jones (rick.jones2_at_hp.com)
Date: 10/07/05 

Date: Fri, 07 Oct 2005 01:38:19 GMT

OR <oryjkov@gmail.com> wrote:
> Is it still possible to buy an 8-port gigabit hub without switch
> capabilities(i.e. one which broadcasts on all of its ports)? I
> tried looking for one, but only found switches...

Was it ever possible to buy a gigabit hub?

Are you looking to do packet tracing or something? A managed switch
with "monitor port" capability might be the way to go there.

rick jones 

-- 
Process shall set you free from the need for rational thought. 
these opinions are mine, all mine; HP might not want them anyway... :)
feel free to post, OR email to rick.jones2 in hp.com but NOT BOTH...

Relevant Pages

  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: Configuring Cisco IPS High Bandwidth Using EtherChannel Load Balancing
    ... "If the paired interfaces are connected to the same switch, ... VLANs for the two ports. ... IPS is able to track traffic per-VLAN, ... VLAN Pair mode uses one interface only and this is the only supported ...
    (Focus-IDS)
  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: running out of IP Address! help!
    ... I believe it could handle 4096 VLANs + router interfaces. ... a layer-3 switch is the way to go. ... having subnets won't prevent broadcasts. ... will only hit ports that are members of that VLAN, ...
    (microsoft.public.win2000.networking)
  • Re: Auto-sensing for IPS devices
    ... Auto-Negotiation is essential in larger networks. ... about 1000's of switch ports and PC's connecting/disconnecting ... the ports at whatever they need to be. ... > you MUST set BOTH speed and duplex settings and you MUST set BOTH ...
    (Focus-IDS)