lot of Rx packet errors

From: tas (michu_at_right.pl)
Date: 10/27/05

  • Next message: Tauno Voipio: "Re: OpenVPN troubles" 
    Date: 27 Oct 2005 10:13:16 -0700

    HI
    i'm haveing troubles with my network. Here are some infos:

    ifconfig:

    eth0 Link encap:Ethernet HWaddr 00:C0:DF:EA:DB:F7
              inet addr:62.21.40.142 Bcast:62.21.47.255
    Mask:255.255.240.0
              inet6 addr: fe80::2c0:dfff:feea:dbf7/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
              RX packets:9047 errors:0 dropped:0 overruns:0 frame:0
              TX packets:8092 errors:0 dropped:0 overruns:0 carrier:0
              collisions:1 txqueuelen:1000
              RX bytes:4063534 (3.8 MiB) TX bytes:1190690 (1.1 MiB)
              Interrupt:11 Base address:0x6200

    eth1 Link encap:Ethernet HWaddr 00:50:04:82:11:D0
              inet addr:192.168.0.1 Bcast:192.168.0.255
    Mask:255.255.255.0
              inet6 addr: fe80::250:4ff:fe82:11d0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
              RX packets:22992 errors:897 dropped:0 overruns:0 frame:908
              TX packets:28676 errors:0 dropped:0 overruns:0 carrier:2
              collisions:0 txqueuelen:1000
              RX bytes:7346616 (7.0 MiB) TX bytes:17211233 (16.4 MiB)
              Interrupt:10 Base address:0x6300

    dmesg:

    eth0: RealTek RTL-8029 found at 0x6200, IRQ 11, 00:C0:DF:EA:DB:F7.
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    0000:00:09.0: 3Com PCI 3c980 Cyclone at 0x6300. Vers LK1.1.19

    OS is Debian 3.1, eth0 is external interface, and eth1 is the trouble
    one, connected to the switch. Transferring between this box and another
    is very slow.

    I'm wondering what is the problem, software or hardware?
    and how to diagnose it?

    thx !!

  • Next message: Tauno Voipio: "Re: OpenVPN troubles"

    Relevant Pages

    • Many Rx packet errors
      ... 3c59x: Donald Becker and others. ... one, connected to the switch. ... Transferring between this box and another ...
      (comp.os.linux.setup)
    • Re: Mouse stalls with 2.6.5-rc5-mm2
      ... > The times correspond nicely to the mouse stalls, ... > "Master View PRO" KVM switch. ... > Comlete dmesg output, .config, ver_linux output, lspci output, lsusb ... does the resync fail if you are not using KVM and plug the mouse ...
      (Linux-Kernel)
    • Re: panic: sbflush_locked on 5.4-p5/i386
      ... >> Unfortunately I don't have these dumps anymore, I will try to switch ... >> mpsafenet back on and wait for a new ones. ... Corresponding dmesg & sysctl output can be found at ...
      (freebsd-stable)
    • Re: Wireless card not showing up
      ... the wired network is showing up ... Yes there is a switch, ... I expected that even if switched off it would show up in dmesg though. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
      (Debian-User)
    • Re: Router/modem/NAS
      ... Rob Kendrick wrote: ... "Network protocol error", but I am using it with a 100Mb/s switch and ... The Gigabit switch is on order :-) ... I timed it transferring 64MB and got a rate of 72,654B/s which is ...
      (comp.sys.acorn.apps)