Re: IP forwarding
- From: Llanzlan Klazmon <Klazmon@xxxxxxxxxxxxxxxx>
- Date: 28 Feb 2006 11:08:57 +1300
"manoj" <manoj23@xxxxxxxxx> wrote in news:1141069038.406251.98040
@v46g2000cwv.googlegroups.com:
Sorry for being incomplete. Here is the latest routing table info.
root@xxxxxxxxxxx:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
eth2
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1
10.21.2.0 0.0.0.0 255.255.254.0 U 0 0
0 eth0
0.0.0.0 10.21.2.1 0.0.0.0 UG 0 0
0 eth0
I have also done the following to be on the safer side:
echo 0 > /proc/sys/net/ipv4/conf/eth1/rp_filter
echo 0 > /proc/sys/net/ipv4/conf/eth3/rp_filter
I want traffic on eth1 to be forwarded to eth2. The output of 'ifconfig
eth1' shows a value of zero in TX packets field.
Running 'tcpdump -i eth1' shows that eth1 is receiving packets intended
for eth2.
What is the destination address of these packets?
Klazmon.
Thanks,
manoj
.
- Follow-Ups:
- Re: IP forwarding
- From: manoj
- Re: IP forwarding
- References:
- IP forwarding
- From: manoj
- Re: IP forwarding
- From: Grant
- Re: IP forwarding
- From: manoj
- Re: IP forwarding
- From: David Schwartz
- Re: IP forwarding
- From: manoj
- Re: IP forwarding
- From: yozhang
- Re: IP forwarding
- From: manoj
- Re: IP forwarding
- From: Llanzlan Klazmon
- Re: IP forwarding
- From: manoj
- IP forwarding
- Prev by Date: Re: IP forwarding
- Next by Date: Re: IP forwarding
- Previous by thread: Re: IP forwarding
- Next by thread: Re: IP forwarding
- Index(es):
Relevant Pages
|