Re: CAT-5 cable stuck in ethernet port - can't remove

It worked! Thanks so much. Turns out the right way was to press down
hard on the deep in the clip using a very small screwdriver, and then
*gently* pull the cable out. That was a lifesaver.

.

Relevant Pages

  • Re: Soldering a Broken TV
    ... Clip it to the screwdriver and clip it to DAG ... The OP may think you mean the braid that connects to the tube base ... reservoir caps must be discharged too. ... Screwdriver with a wire wrapped around it connected to the dag strap. ...
    (sci.electronics.repair)
  • Re: Weird hex bolt size
    ... I haven't used a screwdriver on a gubile clip for 20 years. ... never holed a hose nor a hand since. ...
    (uk.rec.motorcycles)
  • Re: Time Comp Noisy Fan
    ... > I don't think that screwdriver damage would happen without the person ... Yep, now that I'm 'familiar' with the removal of the fan, I could repeat the ... new fan have slightly different clip arrangements. ... the central lug and the new one, ...
    (uk.adverts.computer)
  • Re: Weird hex bolt size
    ... one of the hoses underneath and need to remove the tank to get a ... screwdriver onto the jubilee clip) ... I haven't used a screwdriver on a gubile clip for 20 years. ...
    (uk.rec.motorcycles)
  • Re: OFF-TOPIC How can I get into my stronbox? (Lost Keys)
    ... thin blade screwdriver. ... Unbend the clip, insert it into the opening at the ... screwdriver in just a bit at the top. ... opens. ...
    (rec.crafts.metalworking)