Re: Adding a new route
3) When connecting via pptpconfig, I authenticate but the same default
gw is there. So:
original dhcp gw: 10.101.44.1
pptp needs to have some way to get packets to the network at the other
end, so you need to keep this entry.
vpn gw I need to use sometimes: 192.168.2.101
What network do you need to contact?
You really need to give us more information. Post the output of "route
-n" before and after starting pptp, and tell us a bit more about the VPN.
.
Relevant Pages
- Re: Ethernet issue: works one way but not another
... packets transmitted, 5 packets received, 0% packet loss ... (This is when connected directly to internet through ... FBSD, I have been working with BSDI at the isp I work for for the last ... As for my network topology, I have an internal network that goes ...
(freebsd-questions) - Re: Update: UDP 770 Potential Worm
... > the network immediately after the 'attack', ... were no packets indicating some form of replication. ... I noticed that the UDP ... > of the UDP datagrams is the IP address of the proxy? ...
(Incidents) - Re: IDSIPS that can handle one Gig
... especially with 64-byte UDP packets. ... There are plenty of network IPS's ... IDS/IPS devices through use of fragments. ... Find out quickly and easily by testing it with real-world attacks from ...
(Focus-IDS) - Re: iptables and dhcp
... > the same physical network segment as the firewall and the remote DHCP ... You used INPUT and not FORWARD chain ... # This target allows packets to be marked in the mangle table ...
(comp.os.linux.networking) - RE: Mapping Class A network ( any easy trick?)
... and wondering how I can map the network ... packets per second rate to ask for. ... This will read the payloads.conf file which may have multiple payloads ... per port. ...
(Pen-Test) |
|
