Channel Bonding: link aggregation across 2 switches
There are 2 switches on the data centre which is a switch managed by the
hosting company. Our servers have dual NICs in them and they are currently
configured using active-backup. Thus, only one slave is active at any time.
AFAIK, the switch is meshed together to provide redundant connections.
In this scenario, is it possible to have have link aggregation across 2
different switches that are meshed together ?
.
Relevant Pages
- Re: Channel Bonding: link aggregation across 2 switches
... configured using active-backup. ... (IP layer), especially if your switches can also route at wire speed. ... You then advertise a route to the third IP ...
(comp.os.linux.networking) - Re: Random Failed Connection on Port 25 from CSS Keep-Alive
... We are running Sendmail 8.13.8+Sun/8.13.8 on a fully patched ... seen this issue occur on other servers. ... (Solair 8 servers on the same network ... Connected to the BI 4000 was a group of managed switches. ...
(comp.mail.sendmail) - Re: Windows 2008 IPv6
... Routing is routing, whether you are using vlans or not. ... Like if I have my servers in a seperate VLAN or NETWORK.. ... I'm wondering if my authentication servers are on VLAN1 how do you get users from VLAN2 to authenticate and use services from VLAN1.. ... are capable of VLAN's configure your switches to separate the servers ...
(microsoft.public.windows.server.networking) - Re: Layer 3 Etherchannel Issue
... I have bought a pair of Catalyst 3750G switches with the advanced IP ... balancing using Layer 3 by assigning the port channel an IP address. ... channel and it load balance using src-dst-ip to three backend servers ...
(comp.dcom.sys.cisco) - Re: Windows 2008 IPv6
... Assuming that the servers with the 4 NIC's are DC's you should avoid ... are capable of VLAN's configure your switches to separate the servers ... The equallogic storage array is basically on it's own network. ...
(microsoft.public.windows.server.networking) |
|
