Re: D-Link GLB-502T ADSL Router problem in "Bridge mode"

Hi Buddy,

Even I am facing the similar type of problem. Since I do not have a LAN
card in my PC, I am using the USB connection. Still it doesn't work
in a PPPoE mode within the router. I have downloaded the PPPoE dialer
and it worked for me. To do this u need to set the router in a bridge
mode.

Reset all the previous settings in GLB-502T router and reboot it.
login to the router (http://192.168.1.1 username/pass = admin/admin) >
New Connection, select TYPE as Bridge and opposite to it, in the blank
space give some name to the connection (eg: Dataone), select LAN Lan
group1, and set VCI=35 and do apply,
then go to tools, click system commands, and select "save all",
press it and wait for the router to reboot.

That's all with the router side..
Now you need a pppoe dialer (download it from
http://www.calcuttatelephones.com/dataoneinstall/menu.html ) for
windows 98/2000.
However if you are using XP, you need to select a new network
connection and select ppp, dsl one and that's all.

Still I am not very much comfortable with GLB-502T .. the USB link
disconnects quit frequently and I have to reboot the router. In
addition, the router gets heated quit soon.

Enjoy...

Jordan...

arnuld wrote:
hai all,

i am using the mentioned router & running into some trouble, even
D-Link's TSEs (technical Support Executives) are *DEAD* in front of my
problem. i talked with them for hours & still no solution.

it works fine on the LAN side, no issues here. D-Link TSEs told me that
Router does not work in the PPPoE mode by default, it uses Bridge-Mode
instead. since my ISP uses PPPoE so they said me to 1st configure it in
Bridge-Mode & then make a PPPoE dial-up connection to the internet,
then it will work. but it doesn't. i have configured it in Bridge-mode
with correct VPI/VCI values & when i try to make a dial-up with
"pppoeconf" it says "unable to detect a PPPoE access concentrator on
eth0". i tried an ADSL modem from my friend & it is working even now i
am using it to post my message but tomorrow he will take it back as
this is the only one modem he possesses. i have replaced D-Link Router
with new unit & problem is still there.

need help.

"arnuld"

.

Relevant Pages

  • Re: Loss of Connectivity on Only One PC on a LAN
    ... When you ran the Network Setup Wizard, ... The original setup of the LAN was done entirely by the user of the other PC on that LAN in July. ... I use a LAN connection which consists of two PCs each connected to a Linksys BEFSR 41 Router. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Sharing WLAN internet connection for LAN - please advise
    ... >What is the best way to share WLAN internet connection for small LAN ... to add a router with NAT. ...
    (alt.internet.wireless)
  • Re: verizon FIOS +linux
    ... wo we temporarily hooked the Verizon ... router and activated the service. ... If pppoe, I'd need a phone line, which I ... many interruptions - seems like my connection works according to the ...
    (comp.os.linux.misc)
  • Re: verizon FIOS +linux
    ... connection, which advertises 5Mbps upload, and between 5 and 50 Mbps ... Mbits/sec down, 2 Mbits/sec up ... router and activated the service. ... It's pppoe, not dhcp. ...
    (comp.os.linux.misc)
  • Re: Loss of Connectivity on Only One PC on a LAN
    ... I use a LAN connection which consists of two PCs each connected to a Linksys BEFSR 41 Router. ... IntelPRO/1000 MT Network Connection - ...
    (microsoft.public.windowsxp.network_web)