Fedora Core 5 tg3 dropping packets?
I suspect that the tg3 driver that comes with the latest Fedora Core 5
kernel (kernel-smp-2.6.17-1.2187_FC5 or 2174) is dropping packets.
lspci identifies the hardware as
Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
Anyone out there have experience (good or bad) with this combination?
.
Relevant Pages
- Re: Slow internet on AMD64 running Etch
... your hardware if you run the command "lspci" from ... Another thing that might help is the output of the command ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
(Debian-User) - Uniprocessor performance drop in 2.6.x
... starts dropping packets at ~100Kpps, ... This is pitiful performance for this hardware. ... increased the rx ring in the e1000 driver to 512 with little change ... or is there some tuning parameter ...
(comp.os.linux.misc) - Re: [ANNOUNCE] Framework for automatic Configuration of a Kernel
... to have lspci installed). ... > the Hardware Information directly from the I/O and not ... > Otopia Project. ... send the line "unsubscribe linux-kernel" in ...
(Linux-Kernel) - Re: [ANNOUNCE] Framework for automatic Configuration of a Kernel
... The good thing about lspci is that it ... hardware information but through the /proc or /sys interface. ... send the line "unsubscribe linux-kernel" in ...
(Linux-Kernel) - Re: Hardware compatibility issues
... I checked http://kmuto.jp/debian/hcl/ for hardware compatibility of Debian. ... As this page tells to put the output of lspci -n command and then it shows ... the availability of drivers of the corresponding hardware. ...
(Debian-User) |
|
