Two NICs, Two networks, secure websites
- From: "dwed" <dwedwick@xxxxxxxxx>
- Date: 29 Oct 2006 08:28:18 -0800
Hi!
I have a Cisco router (provided by the ISP) that offers 29 usable IP's.
One of the public IP's is set to be the WAN IP of a simple SOHO
Linksys router that then creates a private network 192.168.1.0. There
is a Linux server with Apache on the private network. Port forwarding
on the Linksys router allows SSL access to secure web pages,
unencrypted HTTP, SSH, etc. to the Linux server. This all is working
OK.
I need to have a 2nd SSL site running on the same Linux server. So, I
installed a 2nd NIC and connected it to the Cisco router and used one
of the available public IP's. I cannot connect to the new public IP
(via the new NIC), but can still connect to everything described in the
1st paragraph above.
I can ping out each of the interfaces (e.g. ping -I eth0 yahoo.com and
ping -I eth1 yahoo.com both work). The results of route are:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
AAA.BBB.CCC.160 * 255.255.255.224 U 0 0 0
eth1
192.168.1.0 * 255.255.255.0 U 0 0 0
eth0
127.0.0.0 * 255.0.0.0 U 0 0 0
lo
default 192.168.1.1 0.0.0.0 UG 0 0 0
eth0
On the server, I can do lynx https://192.168.1.2 and lynx
https://AAA.BBB.CCC.164.
https://AAA.BBB.CCC.164 does not. What needs to be done to allowFrom outside of the server, https://AAA.BBB.CCC.163 works now, but
https://AAA.BBB.CCC.164 to work? And/or, what can I do to troubleshoot
the problem?
eth0 Link encap:Ethernet HWaddr 00:40:F4:E9:3F:3D
inet addr:192.168.1.2 Bcast:192.168.1.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6335 errors:0 dropped:0 overruns:0 frame:0
TX packets:5026 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1373872 (1.3 Mb) TX bytes:2199390 (2.0 Mb)
Interrupt:16 Base address:0xf000
eth1 Link encap:Ethernet HWaddr 00:0C:76:B4:CA:82
inet addr:AAA.BBB.CCC.164 Bcast:AAA.BBB.CCC.191
Mask:255.255.255.224
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1582 errors:0 dropped:0 overruns:0 frame:0
TX packets:2133 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:100305 (97.9 Kb) TX bytes:166007 (162.1 Kb)
Interrupt:21 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:209 errors:0 dropped:0 overruns:0 frame:0
TX packets:209 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22394 (21.8 Kb) TX bytes:22394 (21.8 Kb)
Thanks!
.
- Prev by Date: Re: Netgear WG311 v3 on Fedora core 4
- Next by Date: Re: proftpd closing session after processing user password
- Previous by thread: Client to connect to a chat server
- Next by thread: Writing Hostname to router
- Index(es):
Relevant Pages
|
