ip route problem

Hi,
I have this problem...

I woudl like to do something like this:

net1 <---> A e1 <---> eth0 <---> linux <----> eth1 <---> e2 (B) e3<--->
net2

where:
net1 172.24.132.0/24
A cisco router
e1 172.24.130.5/30
eth0 172.24.130.6/30

eth1 172.24.129.5/30
B cisco router (dynamic routing)
e2 172.24.129.6/30
e3 172.24.131.1
net2 172.24.131.0/24

I want to access net2 from net1

there is static routing set on A: 172.24.131.0/24 via eth0
then there is 172.24.132.0/24 via eth0
and 172.24.131.0/24 via e2

i can ping net1 and net2 from linux box, I can't from net1 to net2 nor
from net2 to net1...
what else should I add to routing table ?

thnx for reply

V.

.

Relevant Pages

  • Re: ip route problem
    ... B cisco router (dynamic routing) ... I want to access net2 from net1 ... there is static routing set on A: 172.24.131.0/24 via eth0 ...
    (comp.os.linux.networking)
  • Re: Multihomed Win2k Server Routing Issue
    ... cisco router, you can use route command on 192.168.1.x computer pointing ... Now, what the NAT does blocking all trafiics from outside, in your case it is ... Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net ... gateway for all of the machines in the 192.168.1 subnet. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Small network to Net setup suggestions.
    ... I've been out of the "routing" part of things for a long long time. ... Our server is just one of those Dell 2850 w/ built in ethernet ports ... Its definately still my NAT. ... > business-grade Cisco router, though they are of course first-rate units. ...
    (microsoft.public.win2000.networking)
  • Re: Access to public host from private host through Linux router
    ... > external ethx (connected to the Internet). ... the routing table after reading the relevant portions of the NAG). ... the actual routing was being done by the CISCO router which had been ... Any pointers to any online docs that deal with Linux routing _in_depth_ ...
    (comp.os.linux.networking)
  • Windows 2000 RAS Server and a Cisco Client Router
    ... I have two LANs connected by a Cisco router and a Win 2000 Server Box. ... The Cisco and the Win2K PC are connected by a dial-up link whereas the ... Only when I stop and start the Win2K´s "Routing and Remote Access ...
    (microsoft.public.win2000.ras_routing)