Re: routing



Hi,

I think you need to run NAT on the linux router so that it translates
your private ip address into public ip address.
if you can send ur ip address configuration on LAN side and firewall
side i can help you trouble shoot this.




On Nov 28, 10:10 am, "pandi" <k.pand...@xxxxxxxxx> wrote:
Hi Folks,

I have configured linux proxy server in kernel 2.4 (Redhat Linux 9).

I had 2 network cards..One is connected to lan other one is goes
through the firewall..

I can ping the dns ip. dig nslookup worked successfully for all sites.
But I can t able to access the websites through squid. Squid is working
fine.

that is I created routes for external network.. through rc.local.

Evenafter rebbooting the routes are not appear in IP Routing
Table.(route -n)

From lan I cannot access the internet..But if I configure one DMZ ip in my lan..I can access all websites...I
think the routing entry is problem..

This is scenario..

2 network cards..one for internal other for external..Both connected to
Lan switch...

Lan switch is connected to Internet Switch ...Internet switch connected
to firewall..firewall...

How to update kernel routing tables( I had done in
/etc/init.d/rc.local...but not in effect)

.



Relevant Pages

  • Re: High end network routing,
    ... > Layer 3 routing but they will share the VLAN segments. ... Enterprise Linux due to the longer life of the OS. ... A consultant trying to sell me a $17k Foundry switch is ... > $17k on a new switch right now but I need to revive a failing network. ...
    (RedHat)
  • Re: Making linux firewall/gateway
    ... Your best to just dual home the Linux box and connect your LAN machines with ... linux box as opposed to just the switch. ... > internet connection), and it has one pci slot. ...
    (comp.os.linux.networking)
  • Re: Internet Explorer, again
    ... > A while ago I asked about how to secure a LAN with one client running IE ... > VMware on Linux, so most of the time my wife used Linux. ... One for Linux, and one for Windows. ... > The way the switch works is it switches the power to either the Linux ...
    (comp.os.linux.networking)
  • Re: Internet Explorer, again
    ... > A while ago I asked about how to secure a LAN with one client running IE ... > VMware on Linux, so most of the time my wife used Linux. ... One for Linux, and one for Windows. ... > The way the switch works is it switches the power to either the Linux ...
    (comp.os.linux.security)
  • RE: Packet routing
    ... Yes, the best bay of doing this is, creating VLANS on the Layer 3 switch ... Subject: Packet routing ... I have a lan set up in the server room with ... Now what routing should be done so that the packets ...
    (RedHat)