integrate a ppp-connected PC to my LAN. arp problem?



I want to integrate a remote PC "ted" connectet by ppp to my LAN (192.168.0.x). The interface is to the remote PC is: 192.168.0.52:192.168.0.220. The 220 is the remote PC. I can ping to. I can ssh to. But trying to connect to my LAN by DSL by ssh tunnel from somewhat else, I can't reach the PC that is connected by ppp.

rex3:~ # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.220 0.0.0.0 255.255.255.255 UH 0 0 0 ippp2
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0

I already completed arp-table:
rex3:~ # arp -Ds 192.168.0.220 ippp2 netmask 255.255.255.255 pub
rex3:~ # arp -a
rex2 (192.168.0.51) at 00:06:7B:03:94:21 [ether] on eth0
easy (192.168.0.27) at 00:50:8D:6C:64:F1 [ether] on eth0
? (192.168.0.198) at * PERM PUP on eth0
ted (192.168.0.220) at * PERM PUP on ippp2

PC easy is accessible, its a PC in my LAN.

any hints?
tia
Ekkard
.



Relevant Pages

  • Re: SSH attack
    ... then I don't see how you can safely use ssh at all. ... >> scrutinized, stripped and locked down, dedicated (internet) ssh server, ... I first got the idea from ISPs which allow remote control of customer ... For example, I might use a modem on a system with no LAN connection, ...
    (Debian-User)
  • Re: integrate a ppp-connected PC to my LAN. arp problem?
    ... The interface is to the remote PC is: ... But trying to connect to my LAN by DSL by ssh tunnel from somewhat else, I can't reach the PC that is connected by ppp. ...
    (comp.os.linux.networking)
  • Re: integrate a ppp-connected PC to my LAN. arp problem?
    ... The interface is to the remote PC is: ... But trying to connect to my LAN by DSL by ssh tunnel from somewhat else, I can't reach the PC that is connected by ppp. ...
    (comp.os.linux.networking)
  • Re: 1 way remote desktop
    ... I am using the local ip of the desktop as seen on my lan ... laptop = 192.168.0.3 ... also remote access connection mgr is up. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Remote desktop & Netgear router
    ... if you can connect to the PC from another PC using the "private LAN IP address" over your ... local LAN then Remote Desktop is obviously setup right and working. ... The issue then is the port forwarding on the router. ...
    (microsoft.public.windowsxp.work_remotely)