Re: Basp on Broadcom 5704

Hi Kris, thx for your reply.
I've read your suggested file but i suppose that i make some mistakes
:)
In effect i can successfully startup bond0 but i can connect to my
server only from the others serves that are on the same network.

my bond device is 10.1.31.41 from my laptop i cannot login but from
another server (10.1.31.3) i can successfully login.

this is my config file:
=========================================================
NOBOND:

ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:0E:0C:42:A8:EC
ONBOOT=yes
TYPE=Ethernet
DHCP_HOSTNAME=webdru2ux.sede.corp.sanpaoloimi.com
USERCTL=no
PEERDNS=yes
IPV6INIT=no
IPADDR=10.1.31.36
NETMASK=255.255.255.0
GATEWAY=10.1.31.253

ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
HWADDR=00:0E:0C:42:A8:ED
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=yes
IPV6INIT=no
DHCP_HOSTNAME=webdru2ux.sede.corp.sanpaoloimi.com
IPADDR=10.1.31.37
NETMASK=255.255.255.0
GATEWAY=10.1.31.253

These files are ok and i can login from all.

=========================================================

BOND

ifcfg-bond0
DEVICE=bond0
IPADDR=10.1.31.41
NETMASK=255.255.255.0
BROADCAST=10.1.0.0
ONBOOT=yes
BOOTPROTO=none
USERCTL=no

ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:0E:0C:42:A8:EC
ONBOOT=yes
MASTER=bond0
SLAVE=yes
TYPE=Ethernet
DHCP_HOSTNAME=webdru2ux.sede.corp.sanpaoloimi.com
USERCTL=no
PEERDNS=yes
IPV6INIT=no

ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
HWADDR=00:0E:0C:42:A8:ED
ONBOOT=yes
MASTER=bond0
SLAVE=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=yes
IPV6INIT=no
DHCP_HOSTNAME=webdru2ux.sede.corp.sanpaoloimi.com
=========================================================


i suppose that i miss something at routing level :)

Thx for you reply

Mike

.