simple multicast routing

I'm trying to set up a Mandriva box acting as a router. I'd like to
force some multicast addresses to leap from one interface to the other
without any IGMP traffic but rather just a static, administrative
setting.

smcroute sounds like the solution, but it doesn't make any claim to
working in the 2.6 kernel. On my first attempt, I couldn't get it to
compile.

http://www.cschill.de/smcroute/

Should I stop barking up this tree and try to force this behavior out
of mrouted or something else?

Thanks for any responses.
DJN

.

Relevant Pages

  • Re: Howto enable multicast forwarding on Linux
    ... the Linux box still does not forward multicast packets. ... > interface onto another interface. ... You need to run a multicast router to maintain the kernel route tables. ...
    (comp.os.linux.networking)
  • [Full-Disclosure] FW: Cisco Vulnerability forensic protocol analysis results.
    ... AMILABS CISCO IP PROTOCOL EXPLOIT TESTING RESULTS ... Cisco router interfaces using either all or one of the following IP ... of a remote Cisco interface uses all of them. ... output buffer failures, 0 output buffers swapped out Router4# ...
    (Full-Disclosure)
  • Re: Site-to-Site VPN client routing question - clients at branch office not able to acce
    ... I would recommend that you use some other machine as your router, ... select the demand-dial interface from the dropdown list. ... On the RRAS server in Shanghai, configure a demand-dial interface and give it a static route to 194.1.1.0/24 as above. ... This makes sure that the connection is made to the correct dd interface and sets up the correct route back to Shanghai through the VPN link. ...
    (microsoft.public.windows.server.networking)
  • Point to Point T1 with Cisco 1841 Routers
    ... checked it in the morning and on my side, the router had a lot of CRC ... interface FastEthernet0/0 ... ip http access-class 23 ... minute output rate 0 bits/sec, 0 packets/sec ...
    (comp.dcom.sys.cisco)
  • Re: moved a working network, now it doesnt work
    ... router I can ping the internet with no problem. ... From one of your Linux machines can you ping the FA 0/1 interface (default ... are NOT natting so if CAN ping from the router, ...
    (comp.dcom.sys.cisco)