WAN friendly application

Hi,
I am writing a network application that is going to pump in large
amount of data on our WAN link.
I was wondering if it is possible to dynamically find out the WAN
usage or network load and accordingly adjust the rate at which I send
the data over WAN. I do not want my application to entirely use up all
bandwidth.
Any ideas or pointers will be helpful!

Thanks,
Prasad

.

Relevant Pages

  • Re: setting up a remote location (another netbios domain, maybe)...
    ... across wan sites.... ... inside network neighborhood, ... IMHO 6 machines are few machines to justify a DC at remote location, ... overloading the wan link. ...
    (microsoft.public.windows.server.active_directory)
  • Re: ISA Server detected routes - Event 14147
    ... the WAN adapter. ... address of 10.0.0.29 called WAN. ... The "WAN" NIC is associated with External connection on the ISA ... The "LAN" NIC is associated with the Internal network connection 10.0.0.10 ...
    (microsoft.public.isa)
  • Re: Redist. OSPF into BGP -- matching and prepending
    ... St. Customer has its own OSPF network which connects the two. ... All CE routers in our MPLS network run using a private AS (same on all in a region, but we have ASN override configured at the PERs so that one CE can see the routes originated by another) and the core runs a public AS. ... So the idea is, we want the WAN link for 10 Main to be the preferred path for "10" routes and 20 Main to be the preferred route for "20" routes, but if either link goes down we want failover. ... match tag and set both community and local-pref (community is ...
    (comp.dcom.sys.cisco)
  • Re: ISA Server detected routes - Event 14147
    ... does not have 10.255.255.255 associated with the same network (e.g. ... network that WAN is assocuated with. ... I have attached my network configuration, ... element to which this adapter belongs. ...
    (microsoft.public.isa)
  • Re: ISA Server detected routes - Event 14147
    ... Another option I can think of is if the internal network was manually ... with the WAN adapter. ... address of 10.0.0.29 called WAN. ... Connection-specific DNS Suffix. ...
    (microsoft.public.isa)