Re: netfilter & SIP

Balwinder S Dheeman <bsd.SANSPAM@xxxxxxxxxxxxxxxxx> writes:
(snip)
I have:
[bsd@cto ~]$ grep SIP=. /usr/src/linux-2.6.22.8/.config
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_NAT_SIP=m
</blah>

Mmmm. My problem is my ISP gives me an RFC1918 address on my external
interface but they route a static routable IP address to it, in a sort
of NAT-on-their-end. So, if I try using the netfilter stuff above,
it puts the wrong IP address as the place to find me.

Mark
.

Relevant Pages

  • Re: having two interfacesand two default routes..debian etch.
    ... I want to migrate a linux server fronm one ISP to another semalessly. ... and its Internal interface is 192.168.2.1 ... If I now add a second default route as ...
    (comp.os.linux.misc)
  • Re: Cant send packets via WiFi (possibly route issue)
    ... I think that this WiFi device should route all ... it should *all* be routed to the eth1 interface. ... Wireless is much like a point-to-point link using ... The connection between the two networks is the "Wifi AP". ...
    (comp.os.linux.networking)
  • Re: Routing with multiple IPs
    ... Do you have two _physical_ links or just 2 IPs given out by your ISP? ... > plugged on this hub too. ... > webserver (that will be on the LAN, ... > ip, on the box the ping comes through the eth1 interface, when it ...
    (comp.os.linux.networking)
  • RE: Running public IPs inside an RFC 1597 network
    ... > I'm running a typical Class C RFC 1597 network in my lab. ... know or care if we humans designate a subnet as public or private. ... is the absolute most general route there is for a machine. ... In a correctly configured system when you define an interface, ...
    (freebsd-questions)
  • Equal cost paths from separate OSPF Processes
    ... the network statements are valid in all OSPF processes. ... interface Serial0.300 point-to-point ... router#sh ip route ospf ... connected, includes subnets in redistribution ...
    (comp.dcom.sys.cisco)