Re: Two Network cards

Jurgen Haan wrote:

Is one adapter used as a failover for the other? If so, you might want
to try setting up a failover setup that activates the other adapter upon
failure of the first one.

How does one do this?

--
Timothy Murphy
e-mail (<80k only): tim /at/ birdsnest.maths.tcd.ie
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland
.

Relevant Pages

  • Re: Two Network cards
    ... to try setting up a failover setup that activates the other adapter upon ... failure of the first one. ... Uhm.. ...
    (comp.os.linux.networking)
  • Re: 3550-002 fried scsi adapter?
    ... > the following error codes: ... Failure to post is usually the sign of bad news about to happen... ... 112 SCSI adapter without cache ...
    (comp.sys.ibm.ps2.hardware)
  • Re: SCSI tape [more info]
    ... >I should try a different sort of SCSI adapter. ... Failure. ... I moved the 2960 out of the PCI-X slot into a PCI slot ...
    (Fedora)
  • Re: Emergency help required!!! ethernet cards problem
    ... >> TRANSMIT FAILURE ... >> ADAPTER HARDWARE ... >> Recommended Actions ...
    (comp.unix.aix)
  • Re: Quaternions and the stock market
    ... Timothy Murphy wrote: ... >> I have an angle r. ... solution in terms of floating point calculations (hint: ... and note a posteriori your failure to come through with this challenge. ...
    (sci.math)