Re: Overall networking issue...

Jacob Tranholm wrote:

I have the problem that I have to install a server on a larger
professional 100Mbit/s CAT-5 network (with about 100 desktop computers
connected and up to 2-300 more on wireless connections). This network
already has a well-functioning structure, where it is easy to transmit
information at speeds up to 100Mbit/s (the network works). My problem is
that I am not happy with the 100Mbit/s restrictions. The server already
has gigabit network card(s)... And I am wondering how/if it will be
possible to use the gigabit speed without having to change the basic
structure of the network. Because the network is already up and running,
I will get a hard time finding the funds to change everything, and since
100Mbit/s is sufficient in the vast majority of situations, it should
not be necessary.

The 100MBit-Switches, do they have dedicated uplink ports that may be
replaced by GB or optical links?

What would happen if one for instance attached a standard (cheap)
unmanaged gigabit switch (eg. a D-Link DGS-1008D) for such a network.
The server for one port, and the remaining 8 ports connected to the
existing 100Mbit/s network (we can find 8 vacant ports in the existing
structure). Would this give any increase in network speed with the
possibility of 2 (or more) computers at the same time being able to use
the data from the server at speeds closer to the 100Mbit/s. According to
benchmarks the server can read and write the data quite a bit faster
than required by a gigabit connection.

You cannot split a single GB output into 2 or 8 100MBit lines - you would
just create loops.

--
vista policy violation: Microsoft optical mouse found penguin patterns
on mousepad. Partition scan in progress to remove offending
incompatible products. Reactivate MS software.
Linux 2.6.24. [LinuxCounter#295241,ICQ#4918962]
.

Relevant Pages

  • Re: [Fwd: Re: Mainframe not a good architecture for interactive was Re: What is the future of COBOL
    ... I bet Pete was an application programmer and not a system ... Network servers pass messages to each other ... > to a Web Server, this means that for an equal number of clients, a Web ... > server is keeping track of 5 times the connections. ...
    (comp.lang.cobol)
  • Vista Protocol and Program Networking Issues
    ... connections aren't even getting to the servers I'm trying to connect. ... "failed to connect to the port 22 on SERVER" ... firewall both turned off, and turned on. ... also have worked in and outside the network, ...
    (microsoft.public.windows.vista.networking_sharing)
  • Re: Network shares and printing
    ... Click Start, click Control Panel, click Network and Internet Connections, ... Type the correct DNS address in the Preferred DNS server box. ... shared drive and entering proper username and password. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Network intermittently dropping the connection to shared files on server
    ... Just had another Network or Disk Error reported by the Access application ... The server has a mirrored SATA two hard discdrive setup. ... All users that have current connections to the shared files are ... We have a small network < 5 clients connected to a new Dell ...
    (microsoft.public.windows.server.sbs)
  • Re: network troubleshooting
    ... Yes, if the server is dropped to 100Mb/s, clients that are on connected to ... the switch with gigabit links will only be able to communicate with it at ... network adapter, and on the General tab, click Configure, then go to the ... settings on the client, and then swapping in a different switch between the ...
    (microsoft.public.windows.server.sbs)