Re: ad-hoc web server



On Thu, 27 Nov 2008 11:51:48 -0800 (PST), lbrtchx@xxxxxxxxx wrote:
Hi,
~
In order to avoid viruses and things I use knoppix to access the
internet
~
Now, sometimes I need to setup an ad-hoc web server to show case some
work. I don't need a domain name to be resolve, nor do I need this
permanently
~
I thought all I had to do is:
~
1) set up my router to forward http request to port 80 to the IP
address of the internal box where I
~
2) have a service running accepting connections and serving pages on
port 80 from a USB external drive
~
But when I went to check this from a local internet caffee I was
404'ed
~
What else do I need to do?

Does Knoppix run a web server by default? Maybe you have to start it up
or configure it.

Bob T.
.



Relevant Pages

  • Re: SuSEfirewall2 and internal web server problems
    ... YaST provides some usefull tip. ... > the internet and everything works fine. ... > IP shows that I do have port 80 open, and it is possible to establish some ... > web server is not able to send anything in return. ...
    (alt.os.linux.suse)
  • Re: Cannot find server or DNS Error
    ... DIFFERENT IP address on that LAN than the oneon your web server NIC. ... NIC on such and such port ... IF you are just using one web site and ... >> What you try to access the web site from the public (Internet) network, ...
    (microsoft.public.inetserver.iis)
  • Re: oops again
    ... > When you want expose the web server on the local network to the internet, ... > to the internal IP of your web server. ... > You configure the Firewall on the Router to just block every single port. ... > network but does not prevent your PCs from contacting the Internet. ...
    (microsoft.public.inetserver.iis)
  • RE: Outlook Web Access
    ... Please check if TCP port is opened on that device. ... On an internet client, ... "Web server name" in the "Web Server Certificate' page? ...
    (microsoft.public.windows.server.sbs)
  • RE: RWW fails from Internet
    ... >Please try to open the port and to see if it helps. ... Can you access RWW using domain ... >"Web server name" box must be the same name that you use to connect to the ... >Web site from the Internet. ...
    (microsoft.public.windows.server.sbs)