Re: IRQ on PCMCIA Modem

From: Lutz (lst_at_lst-net-worldwi.de)
Date: 11/13/03

  • Next message: Lutz: "Anybody know Sharp PC UM10 Muramasa ?"
    Date: Thu, 13 Nov 2003 01:15:13 +0100
    
    

    Hi,

    did you check whether you have ISA support enabled in your kernel?
    On my old Compaq 1130T, which has no cardbus slots but 16-bit PCMCIA,
    So if it is a pcmcia 16bit this might be the reason.

    I once forgot to compile in ISA support and no cards worked.
    I am not so sure about PNP, I havent enabled CONFIG_ISA and
    CONFIG_ISAPNP in my kernel and it works fine with network, modem, wlan.

    The IRQs on PCMCIA are assigned by cardmgr, AFAIK, ISAPNP has nothing to
    do with it, but if you enable ISAPNP, youŽll probably enable ISA too and
    so it works ...

    Greetz,
    Lutz


  • Next message: Lutz: "Anybody know Sharp PC UM10 Muramasa ?"

    Relevant Pages

    • Re: APM (or ACPI) on an Acer TravelMate 280 (RH9)
      ... Red Hat Linux does not seem to like your laptop's BIOS and PCMCIA ... compile your own kernel in order to get ACPI and PCMCIA working. ... This will open a new window, in this window type in something like the ...
      (comp.os.linux.portable)
    • Re: pcmcia not working
      ... > I've just installed RH9 on my laptop, but I can't get pcmcia to work. ... You need the kernel-source RPM package for your current kernel installed ... To install the RPM package first mount the CDROM as root, ...
      (linux.redhat.misc)
    • PCMCIA: unable to map memory
      ... Since nearly one year I run a Redhat 7.0 system on ... But I can't convince pcmcia to run with the kernel ... unable to map card memory! ...
      (comp.os.linux.portable)
    • Re: o2Micro PCMCIA Controller Not Working in Linux - Gentoo 2004.1 - Kernel 2.6.5 - Likely a driver
      ... tweaking to get things working just so and keeping my kernel ... > card and chipset), I got my Broadcom wireless card working with a ... > compile with PCMCIA bus support and yenta-cardbus compatibility since ... > controller) or which driver to use to operate that slot. ...
      (comp.os.linux.portable)
    • Re: o2Micro PCMCIA Controller Not Working in Linux - Gentoo 2004.1 - Kernel 2.6.5 - Likely a driver
      ... tweaking to get things working just so and keeping my kernel ... > card and chipset), I got my Broadcom wireless card working with a ... > compile with PCMCIA bus support and yenta-cardbus compatibility since ... > controller) or which driver to use to operate that slot. ...
      (comp.os.linux.setup)