Asus M2400n PCMCIA Card Flash Reader

From: kami (kami_at_nonstop-party.de)
Date: 03/29/04 

Date: 29 Mar 2004 01:37:53 -0800

HI I have got an Asus M2400n, with Debian and Kernel 2.6.
I am using pcmcia-cs 3.2.7 and i want to mount the PCMCIA Card Flash
Reader.
But i don't know how to do it?
Is it possible to mount my Card??

"cardctl ident"
Socket 0:
  product info: "RICOH", "Bay Controller"
  manfid: 0x0000, 0x0000
  function: 254 ((null))
Socket 1:
  no product info available

  
  
"cardctl status"
Socket 0:
  3.3V 16-bit PC Card
  function 0: [ready]
Socket 1:
  no card

  
"lsmod"
ds
yenta_socket
pcmcia_core
    
  
SYSLOG :
Mar 29 11:27:18 kamilaptop cardmgr[2958]: unsupported card in socket
0
Mar 29 11:27:18 kamilaptop cardmgr[2958]: product info: "RICOH",
"Bay Controller"
Mar 29 11:27:18 kamilaptop cardmgr[2958]: function: 254 ((null))
  

"lspci -vv"
0000:01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
        Subsystem: Asustek Computer, Inc.: Unknown device 1754
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 6
        Region 0: Memory at 10001000 (32-bit, non-prefetchable)
        Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10400000-107ff000 (prefetchable)
        Memory window 1: 10800000-10bff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
        16-bit legacy interface ports at 0001

0000:01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
        Subsystem: Asustek Computer, Inc.: Unknown device 1754
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin B routed to IRQ 7
        Region 0: Memory at 10002000 (32-bit, non-prefetchable)
        Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 10c00000-10fff000 (prefetchable)
        Memory window 1: 11000000-113ff000
        I/O window 0: 00004800-000048ff
        I/O window 1: 00004c00-00004cff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
        16-bit legacy interface ports at 0001

Relevant Pages

  • Re: SDS PROM-100 software
    ... 2708 EPROM and to consistently read the content of another used 2708 ... card which worked great with Dave Dunfield's RAMless ROM monitor ... socket) with the IA 1010B the 2708 simulator has been a disaster. ... First the original IA 1010B used a weird and probably damaged 24 pin ...
    (comp.os.cpm)
  • Re: Electrolytic caps and 8 bit cards
    ... Those legs are pretty tough. ... I didn't say the card wasn't compatible, I said that the CGA card would ... But then, 2 years ago, when I was tinkering with Socket 4 ... I still have those motherboards. ...
    (comp.sys.ibm.pc.classic)
  • Re: Correct D70 USB cable?
    ... >> Its USB socket appears to take a square plug and has four pins. ... >> The camera will not connect via USB. ... and a inlet socket for a camera card on the other end. ...
    (rec.photo.digital)
  • Re: faulty headphone socket in Cardbus?
    ... it is only the headphone socket in the card that crackles. ... If I move the plug around in the socket a bit there's a position ... Your jack is worn out. ... You wipe some contact cleaner on the plug and work it around in the ...
    (rec.audio.pro)
  • Re: Ipaq 2215 WIFI query
    ... I pull my Socket CF WiFi card out when I am not using it. ... is there 3rd party software to turn wifi on and off? ...
    (microsoft.public.pocketpc.wireless)