Q:how to mount external USB-HDD

From: Barnoid (barnoid.no_at_spam.gmx.net)
Date: 07/03/03 

Date: Thu, 03 Jul 2003 16:30:21 +0900

Hi everyone,

I have a problem mounting my external USB IDE-harddisk in Mandrake 9.1. From
the HOW TOs I've read I know that USB devices should be accessible as
/dev/s??, but the problem is that in /dev there are no SCSI devices, and
also the disc does not show up under /proc/scsi/scsi
Plugging in the HDD before or after the PC starts does not make a
difference.

Below I'll attach more detailed information (HDD plugged in before starting
PC). I'm new to Linux...I hope I provide the relevant stuff, otherwise let
me know.

Thanks a lot,
Barnoid

[root@langnau root]# lsmod
Module Size Used by Not tainted
udf 90464 0 (autoclean)
agpgart 40896 6 (autoclean)
ide-cd 33856 0 (autoclean)
cdrom 31648 0 (autoclean) [ide-cd]
i810_audio 26248 0
soundcore 6276 0 [i810_audio]
ac97_codec 12488 0 [i810_audio]
nfsd 74256 0 (autoclean)
af_packet 14952 0 (autoclean)
floppy 55132 0
eepro100 21844 1 (autoclean)
mii 3832 0 (autoclean) [eepro100]
nls_utf8 1312 1 (autoclean)
nls_cp437 5148 1 (autoclean)
vfat 11820 1 (autoclean)
fat 37944 0 (autoclean) [vfat]
supermount 15296 2 (autoclean)
scsimon 9280 0
usb-storage 72952 0
scsi_mod 103284 2 [scsimon usb-storage]
usbmouse 2936 0 (unused)
keybdev 2720 0 (unused)
mousedev 5268 1
hid 20900 0 (unused)
input 5664 0 [usbmouse keybdev mousedev hid]
ehci-hcd 18568 0 (unused)
usb-uhci 24652 0 (unused)
usbcore 72992 1 [usb-storage usbmouse hid ehci-hcd usb-uhci]
rtc 8060 0 (autoclean)
reiserfs 175120 2

/var/log/messages
[...]
kernel: usb.c: registered new driver usbdevfs
kernel: usb.c: registered new driver hub
kernel: usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
kernel: usb-uhci.c: High bandwidth mode enabled
kernel: usb-uhci.c: USB UHCI at I/O 0x2440, IRQ 16
kernel: usb-uhci.c: Detected 2 ports
kernel: usb.c: new USB bus registered, assigned bus number 1
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: usb-uhci.c: USB UHCI at I/O 0x2460, IRQ 19
kernel: usb-uhci.c: Detected 2 ports
kernel: usb.c: new USB bus registered, assigned bus number 2
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
kernel: ehci-hcd 00:1d.7: Intel Corp. 82801DB USB EHCI Controller
kernel: ehci-hcd 00:1d.7: irq 23, pci mem e09db000
kernel: usb.c: new USB bus registered, assigned bus number 3
kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2002-Dec-20
kernel: hub.c: USB hub found
kernel: hub.c: 6 ports detected
kernel: usbdevfs: remount parameter error
kernel: hub.c: connect-debounce failed, port 1 disabled
kernel: hub.c: new USB device 00:1d.0-1, assigned address 2
kernel: usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any
        active driver.
kernel: hub.c: new USB device 00:1d.0-2, assigned address 3
kernel: usb.c: USB device 3 (vend/prod 0x4ce/0x2) is not claimed by any
        active driver.
kernel: usb.c: registered new driver hiddev
kernel: usb.c: registered new driver hid
kernel: input0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb1:2.0
kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
kernel: hid-core.c: USB HID support drivers
kernel: mice: PS/2 mouse device common for all mice
kernel: usb.c: registered new driver usb_mouse
partmon: ^[[65G[^[[1;32m
kernel: usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
kernel: SCSI subsystem driver Revision: 1.00
kernel: Initializing USB Mass Storage driver...
kernel: usb.c: registered new driver usb-storage
kernel: scsi0 : SCSI emulation for USB Mass Storage devices
kernel: usb-uhci.c: interrupt, status 2, frame# 299
kernel: USB Mass Storage support registered.
[...]

[root@langnau root]# cat /proc/scsi/usb-storage-0/0
   Host scsi0: usb-storage
       Vendor: ScanLogic USBIDE
      Product: ScanLogic USBIDE
Serial Number: None
     Protocol: 8070i
    Transport: Bulk
         GUID: 04ce00020000000000000000
     Attached: Yes

[root@langnau root]# cat /proc/scsi/scsi
Attached devices: none

Relevant Pages

  • WARNING: at net/ipv4/tcp_input.c:2927 tcp_ack+0xd55/0x1991()
    ... I'm running the latest git kernel and I've got ... # Bus options (PCI etc.) ... # Generic Driver Options ... # USB Network Adapters ...
    (Linux-Kernel)
  • Re: PROBLEM: kernel BUG at drivers/media/video/em28xx/em28xx-video.c:891
    ... I am using a Pinnacle Dazzle DVC100 Rev 1.1 USB frame grabber card, and each time I stop capturing video the driver crashes. ... This happens both in an unpatched 2.6.37 kernel and in the debian 2.6.32-5 kernel. ... em28xx driver crashes and usb subsystem hangs when video capturing stops. ...
    (Linux-Kernel)
  • Re: isa0060/serio0 problems -WAS- Re: Asus MB and 2.6.12 Problems
    ... Use a HIGHMEM enabled kernel. ... Linux Plug and Play Support v0.97 Adam Belay ... Non-volatile memory driver v1.2 ... ehci_hcd 0000:00:13.2: new USB bus registered, ...
    (Linux-Kernel)
  • Re: Linux 2.6.13-rc4
    ... > ugly that I won't even show it (the kernel list would eat it as too big ... RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ... ehci_hcd 0000:00:02.2: new USB bus registered, ... # ACPI Support ...
    (Linux-Kernel)
  • [BUG] timer.h
    ... Kernel is a self-compiled 2.6.22 running under Ubuntu Feisty. ... The wireless device is a r8187 USB, the driver is patched for injection capability taken from www.aircrack-ng.org. ... ohci_hcd pcmcia firmware_class usbhid firewire_ohci firewire_core ...
    (Linux-Kernel)