SmartPCI561 56k Modem successfully installed but wvdial doesn't work
From: Peter (peat_hal_at_yahoo.de)
Date: 02/27/04
- Next message: Robert McKee: "Re: Motherboard compatibility (K7VM4 & A7V8X-MX)"
- Previous message: Don Oliver: "Re: Motherboard compatibility (K7VM4 & A7V8X-MX)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 27 Feb 2004 13:17:33 -0800
Hello!
My Modem is a SmartLink SmartPCI561 56k Modem (IRQ11).
It works under Microsoft XP, but not under Redhat 9, kernel is 2.4.20-8.
Already some weeks ago to figure out what i do wrong
- nothing helped :-(. Is there anybody, who could help me??
I have already done:
installed the driver: slamr.o (from slmodem-2.9.6 package)
#/sbin/modprobe slamr
#/usr/sbin/slmodemd --country=GERMANY /dev/slamr0
output:
SmartLink Soft Modem: version 2.9.6 Feb 27 2004 12:54:39
modem lamr0' created. TTY is /dev/pts/4'
symbolic link /dev/ttySL0' -> /dev/pts/4' created.
Use /dev/ttySL0' as modem device, Ctrl+C for termination.
the wvdial.conf looks like:
[Dialer Defaults]
Modem = /dev/ttySL0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
[Dialer Arcor]
Phone = 0192077
Username = arcor
Password = internet
Stupid Mode = 1
Stupid Modem = yes
[Dialer Freenet]
Phone = 01019019231750
Username = freenet
Password = freenet
Stupid Mode = 1
[Dialer Freenet2]
Phone = 01019019231750
Username = freenet
Password = freenet
Stupid Mode = 1
Inherits = Modem0
[Dialer Freenet3]
Phone = 01019019231750
Username = freenet
Password = freenet
Stupid Mode = 1
Stupid Modem = yes
------------------------------------------------------------------------
#wvdial arcor
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT0192077
--> Waiting for carrier.
ATDT0192077
CONNECT 52000
--> Carrier detected. Waiting for prompt.
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT0192077
--> Waiting for carrier.
~[7f]}#@!}!}+} }9}"}&} }*} } }#}%B#}%}%}&?E[02]V}'}"}(}"M}+~~[7f]}#@!}!},}
}9}"}&} }*} } }#}%B#}%}%}&?E[02]V}'}"}(}" [03]~~[7f]}#@!}!}-} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"DX~~[7f]}#@!}!}.} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"}(5~~[7f]}#@!}!}/} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"Ln~~[7f]}#@!}!}0} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"[16]0~~[7f]}#@!}!}1} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"Rk~~[7f]}#@!}!}2} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"}>}&~~[7f]}#@!}!}3} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"Z]~~[7f]}#@!}!}4} }9}"}&} }*} }
}#}%B#}%}%}&?E[02]V}'}"}(}"[17]U~NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT0192077
--> Waiting for carrier.
ATDT0192077
NO DIALTONE
--> No dial tone.
--> Disconnecting at Fri Feb 27 16:55:21 2004
--------------------------------------------------------------------------
So, what shall i do?
- Next message: Robert McKee: "Re: Motherboard compatibility (K7VM4 & A7V8X-MX)"
- Previous message: Don Oliver: "Re: Motherboard compatibility (K7VM4 & A7V8X-MX)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
