XFree86 Instability

From: Hugh T. Ranalli (hugh-NO-SPAM_at_ranalli.NO.SPAM.org)
Date: 01/27/05

  • Next message: Dances With Crows: "Re: XFree86 Instability" 
    Date: Wed, 26 Jan 2005 20:57:17 -0500

    By means of introduction, I'm new to the Linux desktop, but would rate
    myself as "intermediate" when it comes to Linux servers and the Linux
    commmand line (compile apps, configure and write rules for iptables, etc.).

    I have been trying to move to a Debian desktop, and have performed several
    installs in my attempt to get a stable system. I'm running on a Dell 4100
    desktop with 512 MB RAM. The current install was done using the Debian
    "Sarge" network installer (RC2) against the "testing" distribution. The
    system is running the 2.4.27.1 kernel and XFree86 4.3.0.1.

    What is happening is that X will run for an indeterminate length of time (so
    far anywhere from 2 - 30 hours), and will then crash. When X crashes it
    restarts, but then one of two things happens:

    1. Most often, X is stable until I move the mouse. As soon as there is mouse
    movement, it crashes, both at the desktop (KDE) and the display manager
    (GDM).

    2. The mouse doesn't crash X, but logging in does. That is, I can enter my
    user name and password, but as soon as the display manager begins to
    initialize the X session (the grey screen), X blows up and sends me back to
    the display manager.

    I've tried several solutions, all without success, and I'm running out of
    ideas and knowledge. I have been suspecting an interrupt conflict, but am
    puzzled as to why such a conflict wouldn't show up right away.

    I've tried the following:

    1. 2 very different video cards (an ancient Matrox Milllennium II PCI 4MB
    and a new nVidia FX5200 AGP 128MB), using the mga, nv and VESA drivers. The
    same thing happens in all situations, so I've pretty much ruled out the
    video card.

    2. Trying both KDM and GDM

    3. Checking DPMS (it was already disabled) based on one post I found through
    Google.

    3. Reconfiguring PCI devices to move interrupts around. The reconfigurations
    resulted either in X not working at all, or the sound card not
    working. /proc/interrupts doesn't show any conflicts, but lspci -v shows
    that the nVidia card and a 3Com 3C905 network adapter are sharing IRQ 11,
    and that my sound card (Ensoniq 1371) and a (presumably motherboard) device
    identified as "Intel Corp. 82801BA/BAM SMBus: are sharing IRQ 9.

    The XFree86 log files don't show a consistency as to where the X server
    crashes. In each case the message is "Fatal server error: Caught signal 11.
    Server aborting." One log shows that the crashed after the line "(II)
    Initializing int10" (which actually isn't specified anywhere as a Load line
    in my XF86Config-4 file) and in another after the line "(II) Mouse1:
    ps2EnableDataReporting: succeeded."

    I'm going to append my current XF86Config-4 file and one of the XFree86.log
    files to this message. I apologise for the length, but I realise anyone
    trying to help is just going to ask me to post these anyway.

    I really hope someone can help, as I want to move to a Linux desktop,
    but the instability is killing me (the system blew up once as I was typing
    this up - I should know by now to "save early and save often.").

    Thanks in advance to anyone who takes the time to look at this.

    Best wishes,
    Hugh Ranalli

    ========================================================================
    XF86Config-4
    ========================================================================
    # File generated by xf86config.

    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # **********************************************************************

    # **********************************************************************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"

    # This loads the DBE extension module.

        Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection "extmod"
          Option "omit xfree86-dga" # don't initialise the DGA extension
        EndSubSection

    # This loads the Type1 and FreeType font modules
        Load "type1"
        Load "speedo"
    # Load "freetype"
    # Load "xtt"

    # This loads the GLX module
        Load "glx"
    # This loads the DRI module
        Load "dri"

    EndSection

    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

        RgbPath "/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    # FontPath "/usr/X11R6/lib/X11/fonts/local/"
        FontPath "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
        FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # **********************************************************************
    # Server flags section.
    # **********************************************************************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    EndSection

    # **********************************************************************
    # Input devices
    # **********************************************************************

    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************

    Section "InputDevice"

        Identifier "Keyboard1"
        Driver "Keyboard"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

        Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

        Option "XkbRules" "xfree86"
        Option "XkbModel" "microsoft"
        Option "XkbLayout" "us"

    EndSection

    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************

    Section "InputDevice"

    # Identifier and driver

        Identifier "Mouse1"
        Driver "mouse"
    # Option "Protocol" "MouseManPlusPS/2"
        Option "Protocol" "ImPS/2"
        Option "Device" "/dev/psaux"
        Option "Emulate3Buttons" "true"
        Option "ZAxisMapping" "4 5"

    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution" "256"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection

    # **********************************************************************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the XF86Config man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # **********************************************************************
    # Monitor section
    # **********************************************************************

    # Any number of monitor sections may be present

    Section "Monitor"

        Identifier "Dell 1025TM"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

        HorizSync 30-85

    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

        VertRefresh 50-120

    EndSection

    # **********************************************************************
    # Graphics device section
    # **********************************************************************

    # Any number of graphics device sections may be present

    # Standard VGA Device:

    Section "Device"
        Identifier "Standard VGA"
        VendorName "Unknown"
        BoardName "Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset "generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

        Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.

    # BusID "PCI:0:10:0"

    # VideoRam 256

    # Clocks 25.2 28.3

    EndSection

    # Device configured by xf86config:

    Section "Device"
        Identifier "nVidia GeForce FX5200 (MSI)"
        Driver "nv"
        #VideoRam 131072
        # Insert Clocks lines here if appropriate
    EndSection

    # **********************************************************************
    # Screen sections
    # **********************************************************************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier "Screen 1"
        Device "nVidia GeForce FX5200 (MSI)"
        Monitor "Dell 1025TM"
        DefaultDepth 24

        Subsection "Display"
            Depth 8
            Modes "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort 0 0
        EndSubsection
        Subsection "Display"
            Depth 16
            Modes "640x400" "640x480" "800x600" "1024x768" "1280x1024"
    "1152x864"
    #"1600x1200"
            ViewPort 0 0
        EndSubsection
        Subsection "Display"
            Depth 24
            Modes "640x480" "800x600" "1024x768" "1280x1024" "1152x864"
    #"1600x1200"
            ViewPort 0 0
        EndSubsection
    EndSection

    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
        Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

        Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"

    EndSection

    # Section "DRI"
    # Mode 0666
    # EndSection

    ========================================================================
    XFree86.log
    ========================================================================
    XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-10 20041215174925
    fabbione@fabbione.net)
    Release Date: 15 August 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.4.26 i686 [ELF]
    Build Date: 15 December 2004

    This version of XFree86 has been extensively modified by the Debian
    Project, and is not supported by the XFree86 Project, Inc., in any
    way. Bugs should be reported to the Debian Bug Tracking System; see
    <URL: http://www.debian.org/Bugs/Reporting >.

    We strongly encourage the use of the "reportbug" package and command
    to ensure that bug reports contain as much useful information as
    possible.

    Before filing a bug report, you may want to consult the Debian X FAQ:
           XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
      plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

    Module Loader present
    OS Kernel: Linux version 2.4.27-1-386 (joshk@trollwife) (gcc version 3.3.4
    (Debian 1:3.3.4-9)) #1 Fri Sep 3 06:24:46 UTC 2004
    Markers: (--) probed, (**) from config file, (==) default setting,
             (++) from command line, (!!) notice, (II) informational,
             (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 24 21:08:42 2005
    (==) Using config file: "/etc/X11/XF86Config-4"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Dell 1025TM"
    (**) | |-->Device "nVidia GeForce FX5200 (MSI)"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "microsoft"
    (**) XKB: model: "microsoft"
    (**) Option "XkbLayout" "us"
    (**) XKB: layout: "us"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to
    "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (++) using VT number 7

    (WW) Open APM failed (/dev/apm_bios) (No such device)
    (II) Module ABI versions:
     XFree86 ANSI C Emulation: 0.2
     XFree86 Video Driver: 0.6
     XFree86 XInput driver : 0.4
     XFree86 Server Extension : 0.2
     XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     Module class: XFree86 Font Renderer
     ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     ABI class: XFree86 Video Driver, version 0.6
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 02 class 06,00,00 hdr
    00
    (II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 02 class 06,04,00 hdr
    01
    (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 02 class 06,04,00 hdr
    01
    (II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 02 class 06,01,00 hdr
    80
    (II) PCI: 00:1f:1: chip 8086,244b card 8086,4541 rev 02 class 01,01,80 hdr
    00
    (II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 02 class 0c,03,00 hdr
    00
    (II) PCI: 00:1f:3: chip 8086,2443 card 8086,4541 rev 02 class 0c,05,00 hdr
    00
    (II) PCI: 01:00:0: chip 10de,0322 card 1462,9110 rev a1 class 03,00,00 hdr
    00
    (II) PCI: 02:0a:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr
    00
    (II) PCI: 02:0c:0: chip 1274,1371 card 1274,1371 rev 09 class 04,01,00 hdr
    00
    (II) PCI: 02:0d:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr
    00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
     [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
     [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
     [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
     [0] -1 0 0xfc900000 - 0xfe9fffff (0x2100000) MX[B]
    (II) Bus 1 prefetchable memory range:
     [0] -1 0 0xe4600000 - 0xf46fffff (0x10100000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is
    cleared)
    (II) Bus 2 I/O range:
     [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
    (II) Bus 2 non-prefetchable memory range:
     [0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B]
    (II) Bus 2 prefetchable memory range:
     [0] -1 0 0xf4700000 - 0xf47fffff (0x100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @
    0xfd000000/24, 0xe8000000/27, BIOS @ 0xfe9e0000/17
    (II) Addressable bus resource ranges are
     [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
     [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
     [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
     [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
     [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
     [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
     [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
     [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
     [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to
    0xf7ffffff
    (II) Active PCI resource ranges:
     [0] -1 0 0xfeaff400 - 0xfeaff47f (0x80) MX[B]
     [1] -1 0 0xfeaff800 - 0xfeafffff (0x800) MX[B]
     [2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
     [3] -1 0 0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
     [4] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
     [5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
     [6] -1 0 0x0000d880 - 0x0000d8ff (0x80) IX[B]
     [7] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B]
     [8] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
     [9] -1 0 0x0000efa0 - 0x0000efaf (0x10) IX[B]
     [10] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
     [11] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
     [0] -1 0 0xfeaff400 - 0xfeaff47f (0x80) MX[B]
     [1] -1 0 0xfeaff800 - 0xfeafffff (0x800) MX[B]
     [2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
     [3] -1 0 0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
     [4] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
     [5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
     [6] -1 0 0x0000d880 - 0x0000d8ff (0x80) IX[B]
     [7] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B]
     [8] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
     [9] -1 0 0x0000efa0 - 0x0000efaf (0x10) IX[B]
     [10] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
     [11] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
     [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
     [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
     [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
     [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
     [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
     [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
     [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
     [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
     [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
     [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
     [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
     [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
     [5] -1 0 0xfeaff400 - 0xfeaff47f (0x80) MX[B]
     [6] -1 0 0xfeaff800 - 0xfeafffff (0x800) MX[B]
     [7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
     [8] -1 0 0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
     [9] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
     [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
     [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
     [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
     [13] -1 0 0x0000d880 - 0x0000d8ff (0x80) IX[B]
     [14] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B]
     [15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
     [16] -1 0 0x0000efa0 - 0x0000efaf (0x10) IX[B]
     [17] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
     [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     Module class: XFree86 Server Extension
     ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
            compiled for 4.3.0.1, module version = 1.0.0
            Module class: XFree86 Server Extension
            ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.2
     Module class: XFree86 Font Renderer
     ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols
    found
    (II) Module speedo: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.1
     Module class: XFree86 Font Renderer
     ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
    (II) Module glx: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
    Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No
    symbols found
    Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No
    symbols found
    Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":
    No symbols found
    Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":
    No symbols found
    (II) Module GLcore: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
    (II) Module dri: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
    (II) Module drm: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nv"
    (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
    (II) Module nv: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.1
     Module class: XFree86 Video Driver
     ABI class: XFree86 Video Driver, version 0.6
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     Module class: XFree86 XInput Driver
     ABI class: XFree86 XInput driver, version 0.4
    (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
     Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
     Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
     GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
     GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
     Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
     GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
     GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
     GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
     GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
     GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
     Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
     GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
     GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
     0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
     Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
     GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
     Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
     GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
     GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
     0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
     Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
     GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
     GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
     0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
     GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
     GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
     GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
     GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
     0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset GeForce FX 5200 found
    (II) resource ranges after xf86ClaimFixedResources() call:
     [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
     [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
     [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
     [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
     [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
     [5] -1 0 0xfeaff400 - 0xfeaff47f (0x80) MX[B]
     [6] -1 0 0xfeaff800 - 0xfeafffff (0x800) MX[B]
     [7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
     [8] -1 0 0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
     [9] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
     [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
     [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
     [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
     [13] -1 0 0x0000d880 - 0x0000d8ff (0x80) IX[B]
     [14] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B]
     [15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
     [16] -1 0 0x0000efa0 - 0x0000efaf (0x10) IX[B]
     [17] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
     [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    (II) resource ranges after probing:
     [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
     [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
     [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
     [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
     [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
     [5] -1 0 0xfeaff400 - 0xfeaff47f (0x80) MX[B]
     [6] -1 0 0xfeaff800 - 0xfeafffff (0x800) MX[B]
     [7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
     [8] -1 0 0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
     [9] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
     [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
     [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
     [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
     [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
     [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
     [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
     [16] -1 0 0x0000d880 - 0x0000d8ff (0x80) IX[B]
     [17] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B]
     [18] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
     [19] -1 0 0x0000efa0 - 0x0000efaf (0x10) IX[B]
     [20] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
     [21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
     [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
     [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
     compiled for 4.3.0.1, module version = 1.0.0
     ABI class: XFree86 Video Driver, version 0.6
    (II) Initializing int10

       *** If unresolved symbols were reported above, they might not
       *** be the reason for the server aborting.

    Fatal server error:
    Caught signal 11. Server aborting

    When reporting a problem related to a server crash, please send
    the full server output, not just the last messages.
    This can be found in the log file "/var/log/XFree86.0.log".
    Please report problems to submit@bugs.debian.org.

     

  • Next message: Dances With Crows: "Re: XFree86 Instability"